Rechercher

IEC 61076-4-116:2012+A1:2015 establishes specifications and test requirements for a high-speed two-part connector with integrated shielding function for use as a printed board connector in industrial environments. The connectors connect a backplane to printed boards. Keywords: Connector, Printed board connector. This consolidated version consists of the first edition (2012) and its amendment 1 (…

IEC 61800-7-302:2015 specifies the mapping of the profile type 2 (CIP MotionTM) specified in IEC 61800-7-202 onto different network technologies. This edition includes the following significant technical changes with respect to the previous edition: - update of patent information; - updates to the Connection Format and connection points; - support of an additional object.

IEC 60793-2-50:2015 is applicable to optical fibre categories B1.1, B1.2, B1.3, B2, B4, B5 and B6. A map illustrating the connection of IEC designations to ITU-T designations is shown in Annex I. These fibres are used or can be incorporated in information transmission equipment and optical fibre cables. Three types of requirements apply to these fibres:<br /> - general requirements, as…

IEC 60793-2-50:2015 is applicable to optical fibre categories B1.1, B1.2, B1.3, B2, B4, B5 and B6. A map illustrating the connection of IEC designations to ITU-T designations is shown in Annex I. These fibres are used or can be incorporated in information transmission equipment and optical fibre cables. Three types of requirements apply to these fibres: - general requirements, as defined in IEC…

L'ISO/TR 24119:2015 illustre et explique les principes de masquage de défaut dans des applications où de dispositifs de verrouillage multiples avec contacts libres de potentiels (B1 à Bn) sont connectés en séries à une unité logique (K) réalisant les diagnostics (voir Figures 1 à 7). Il fournit également un guide permettant d'estimer la probabilité de masquage de défaut et la DC…

ISO/TR 24119:2015 illustrates and explains principles of fault masking in applications where multiple interlocking devices with potential free contacts (B1 to Bn) are connected in series to one logic unit (K) which does the diagnostics (see Figures 1 to 7). It further provides a guide how to estimate the probability of fault masking and the maximum DC for the involved interlocking devices. This…

ISO/TS 18339:2015 specifies the design of eyepiece cap and light guide connector of an endoscope to enable the combination of products from different manufacturers. The products intended only for limited combination are out of the scope. It is a mechanical connection; it might not generate best results, but it allows the user to be able to work. ISO/TS 18339:2015 supports manufacturers of…

ISO 18070:2015 specifies a crevice forming technique and crevice former which are intended to be used for crevice corrosion testing of flat specimens or tubes of stainless steels, in corrosive solutions. This International Standard specifies no information concerning how the crevice corrosion testing shall be performed and how the attack shall be evaluated. The crevice former specified in this…

1.1 This Standard applies to cord-connected microwave ovens intended for use on nominal 120/240 V branch circuits and microwave ovens intended for permanent connection to branch circuits up to 240 V, manufactured for use in homes and similar locations 1.2 This Standard specifies methods of testing the energy consumption in both active and standby modes of electrically operated microwave…

1.1 This Standard specifies methods for measuring the volume, energy consumption, and total display area (TDA) of electrically operated commercial refrigeration equipment. 1.2 This Standard applies to commercial refrigerator, refrigerator-freezer, and freezer cabinets and merchandisers that are intended for displaying, storing, or holding food products including canned and bottled beverages…