Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neur...
ISO 80369-6:2016 specifies requirements for small-bore connectors intended to be used for connections in neuraxial applications. Neuraxial applications involve the use of medical devices intended to administer medications to neuraxial sites, wound infiltration anaesthesia delivery, and other regional anaesthesia procedures or to monitor or remove cerebro-spinal fluid for therapeutic or diagnostic…
Specification and qualification of welding procedures for metallic materials — Welding procedure tes...
ISO 15614-8:2016 specifies requirements for the qualification testing of welding procedures for the arc welding of tube to tube-plate joints in metallic materials by manual, partly mechanized, fully mechanized, or automatic processes.
ISO 15614-8:2016 is a part of a series of standards. Details of this series are given in ISO 15607, Annex A.
Qualification by tube to tube-plate joint tests can be…
Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) pipin...
ISO 16631:2016 specifies the requirements and test methods applicable to ductile iron pipes, fittings, accessories and their joints with dimensions compatible with plastic (PVC or PE) piping systems:
- to replace or repair existing plastic pipelines;
- to convey water (e.g. for human consumption, raw water, etc.);
- operated with or without pressure;
- installed below or above…
Small-bore connectors for liquids and gases in healthcare applications — Part 5: Connectors for limb...
IEC 80369-5:2016 specifies dimensions and requirements for the design and functional performance of SMALL-BORE CONNECTORS intended to be used for CONNECTIONS in limb cuff inflation APPLICATIONS of
MEDICAL DEVICES and ACCESSORIES. Limb cuff inflation APPLICATIONS include CONNECTIONS between a sphygmomanometer and its cuff.
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-secti...
ISO 5167-5:2016 specifies the geometry and method of use (installation and operating conditions) of cone meters when they are inserted in a conduit running full to determine the flow rate of the fluid flowing in the conduit.
As the uncertainty of an uncalibrated cone meter might be too high for a particular application, it might be deemed essential to calibrate the flow meter in accordance with…
Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb...
IEC 80369-5:2016 specifies dimensions and requirements for the design and functional performance of small-bore connectors intended to be used for connections in limb cuff inflation applications of medical devices and accessoires. Limb cuff inflation applications include connections between a sphygmomanometer and its cuff. The contents of the corrigenda 1 (2017) and 2 (2021) have been included in…
Connections for fluid power and general use — Hydraulic couplings for diagnostic purposes — Part 2: ...
ISO 15171-2:2016 specifies dimensions, performance requirements, and test procedures for diagnostic couplings with an M16 × 2 connection end that can be connected under pressure without tools to a maximum pressure of 40 MPa (400 bar) providing following stud ends:
? ISO 6149‑2 ? M14 × 1,5;
? ISO 9974‑2 ? M14 × 1,5;
? ISO 1179‑2 ? G 1/4;
? ISO 11926‑2 ? 7/16-20 UNF.
The dimensions of the…
Raccordements pour transmissions hydrauliques et pneumatiques et usage général — Raccords hydrauliqu...
L'ISO 15171-2:2016 spécifie les dimensions, les exigences de performance et les modes opératoires d'essai des raccords de diagnostic avec un embout de raccord M16 X 2 pouvant être connecté sous pression sans outil jusqu'à une pression maximale de 40 MPa (400 bar) fournissant les extrémités mâles suivantes:
ISO 6149‑2:?, M14 X 1,5;
ISO 9974‑2:?, M14 X 1,5;
ISO…
Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum
ISO 7396-1:2016 specifies requirements for design, installation, function, performance, testing, commissioning and documentation of pipeline systems used in healthcare facilities for the following:
- oxygen;
- nitrous oxide;
- medical air;
- carbon dioxide;
- oxygen/nitrous oxide mixtures (see Note 1);
- helium/oxygen mixtures;
- (*) oxygen 93;
-…
Injection containers and accessories — Part 5: Freeze drying closures for injection vials
ISO 8362-5:2016 specifies the shape, dimensions, material, performance requirements and labelling for the type of closure for injection vials, as described in ISO 8362‑1 and ISO 8362‑4, which is used in connection with the freeze drying (or lyophilization) of drugs and biological materials.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this part…
