Recommendations for renewable energy and hybrid systems for rural electrification - Part 9-3: Integr...
IEC TS 62257-9-3:2016(E) specifies the general requirements for the design and the implementation of the interface equipment within the user's installation which connects to a microgrid or the generating part of a standalone system. It applies to simplified user's interfaces (distribution board) in electrical installations with maximum power of 500 VA in decentralized rural…
High-voltage direct current (HVDC) installations - System tests
IEC 61975:2010+A1:2016 applies to system tests for high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The tests specified in this standard are based on bidirectional and bipolar high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected…
Residual current operated circuit-breakers for household and similar use - Part 3-1: Particular requ...
IEC 62873-3-1:2016(E) applies to RCDs equipped with screwless terminals, for current not exceeding 20 A primarily suitable for connecting unprepared (see 3.5) copper conductors of cross-section up to 4 mm2. This part of IEC 62873 cannot be used alone but it is intended to be applied together with an RCD product standard (IEC 61008-1 or IEC 61009-1) if an RCD is equipped with screwless terminals.
Residual current operated circuit-breakers for household and similar use - Part 3-2: Particular requ...
IEC 62873-3-2:2016(E) applies to RCDs equipped with flat quick-connect terminations consisting of a male tab (see 3.2) with nominal width 6,3 mm and thickness 0,8 mm, to be used with a mating female connector for connecting electrical copper conductors according to the manufacturer's instructions, for rated currents up to and including 16 A.
Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules...
ISO 1219-3:2016 supplements ISO 1219-1 and ISO 1219-2 by specifying rules for the generation and combination of symbols of connectable components in circuit diagrams. Using these symbols, the design envelope and piping can be reduced.
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, therma...
IEC 61800-5-1:2007+A1:2016 It specifies requirements for adjustable speed power drive systems, or their elements, with respect to electrical, thermal and energy safety considerations. It does not cover the driven equipment except for interface requirements. It applies to adjustable speed electric drive systems which include the power conversion, drive control, and motor or motors. Excluded are…
Entraînements électriques de puissance à vitesse variable - Partie 5-1: Exigences de sécurité - Elec...
IEC 61800-5-1:2007+A1:2016 spécifie les exigences pour les entraînements électriques de puissance à vitesse variable, ou leurs éléments, en ce qui concerne les considérations de sécurité électrique, thermique et énergétique. Elle ne couvre pas l'équipement entraîné, à l'exception des exigences pour les interfaces. Elle s'applique aux systèmes d'entraînement électrique à…
Non-sewered sanitation systems — General safety and performance requirements for design and testing
IWA 24:2016 specifies technical requirements, test methods, and sustainability considerations for non-sewered sanitation systems. A non-sewered sanitation system, for the purposes of this document, is a sanitation system that 1) is not connected to a networked sewer system and 2) collects, conveys, and fully treats the specific input, to allow for safe reuse or disposal of the generated output.…
Road vehicles — Local Interconnect Network (LIN) — Part 4: Electrical physical layer (EPL) specifica...
ISO 17987-4:2016 specifies the 12 V and 24 V electrical physical layers (EPL) of the LIN communications system.
The electrical physical layer for LIN is designed for low-cost networks with bit rates up to 20 kbit/s to connect automotive electronic control units (ECUs). The medium that is used is a single wire for each receiver and transmitter with reference to ground.
ISO 17987-4:2016 includes…
Universal serial bus interfaces for data and power - Part 1-3: Universal Serial Bus interfaces - Com...
IEC 62680-1-3:2016(E) defines the USB Type-C™ receptacles, plug and cables. It defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the following aspects that are needed to produce and use this new USB cable/connector solution in newer platforms and devices, and that…
