Rechercher

IEC 62613-2:2016 contains standard sheets for different configurations of (shore) socket-outlets, (shore) plugs, ship connectors and ship inlets, hereinafter referred to as accessories, up to 12 kV, 500 A, 50/60 Hz and with up to seven pilot/auxiliary contacts. General requirements are given in IEC 62613-1. This second edition cancels and replaces the first edition published in 2011. This edition…

ISO 18440:2016 defines a protocol for transfer of SLE PDUs between an SLE user and an SLE provider system in terms of: a) the procedures used to establish and release associations; b) the messages exchanged on an established association; c) the procedures used to monitor the status of data communication connections; and d) the methods used to ensure that data are converted between…

ISO 6804:2016 specifies the requirements for three types of rubber or plastics inlet hoses and hose assemblies for washing-machines and dishwashers connected to the domestic water supply at a pressure not exceeding 1 MPa (10 bar). It is applicable to the following types of hose: - type 1: rubber hoses for unheated water supply (maximum temperature 70 °C); - type 2: rubber hoses for…

1.1 This Standard applies to power circuit breakers rated 1000 Vac or less nominal, 1058 Vac (RMS) maximum, and 1500 V dc maximum for use in nonhazardous locations in accordance with the Canadian Electrical Code, Part I. 1.2 This Standard applies to power circuit breakers of the following types: a) stationary (fixed) mounted or drawout mounted types; b) manually operated or power operated…

1.1 This Standard applies to automatically operating gas-fired central furnaces (see Clause 3, Definitions), hereinafter referred to as furnaces, for installation in residential, commercial, and industrial structures including furnaces for direct vent, recreational vehicle, outdoor, and manufactured (mobile) homes. These furnaces may include a cooling unit. All units are to be constructed…

ISO 3964:2016 spécifie l'accouplement entre les pièces à main et les moteurs connectés aux units dentaires. ISO 3964:2016 spécifie les dimensions nominales, les tolérances et la force d'extraction des systèmes d'accouplement utilisés entre la pièce à main et le moteur qui lui fournissent l'eau, l'air, la lumière et l'énergie de rotation.

ISO 3964:2016 specifies the coupling between handpieces and motors connected to dental units. ISO 3964:2016 specifies the nominal dimensions, tolerances and the extraction force of coupling systems for use between handpiece and motor which supply the handpiece with water, air and light and rotation energy.

ISO/IEC 27035-2:2016 provides the guidelines to plan and prepare for incident response. The guidelines are based on the "Plan and Prepare" phase and the "Lessons Learned" phase of the "Information security incident management phases" model presented in ISO/IEC 27035‑1. The major points within the "Plan and Prepare" phase include the following: -…

ISO/IEC 27035-2:2016 provides the guidelines to plan and prepare for incident response. The guidelines are based on the "Plan and Prepare" phase and the "Lessons Learned" phase of the "Information security incident management phases" model presented in ISO/IEC 27035‑1. The major points within the "Plan and Prepare" phase include the following: -…

CISPR 25:2016 contains limits and procedures for the measurement of radio disturbances in the frequency range of 150 kHz to 2 500 MHz. The standard applies to any electronic/electrical component intended for use in vehicles, trailers and devices. Refer to International Telecommunications Union (ITU) publications for details of frequency allocations. The limits are intended to provide protection…