Rechercher

ISO 9170-1:2017 is intended especially to ensure the gas-specific assembly, mechanical resistance, flow, leakage and pressure drop of terminal units and to prevent their interchange between different gases and services and applies to terminal units: a) intended for use in medical gas pipeline systems in accordance with ISO 7396‑1; b) used as pressure outlets on pressure regulators in…

IEC 60335-2-49:2002+A1:2008+A2:2017 deals with the safety of electrically operated commercial hot cupboards not intended for household use. The rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. Hot cupboards with heated tops, heated display cases, heated crockery dispensers and heated shelves and tables are…

ISO 18566-2:2017 dry cooling only surfaces with an air gap between construction and the emitter (not embedded) with or without an insulation fed with water at temperatures below 120 °C connected with a centralized heating and/or cooling supply source intended to be installed in buildings. Ceiling mounted radiant panels covered by this document are limited to a width from 0,3 m up to 1,5 m. ISO…

IEC 62040-1:2017 applies to movable, stationary, fixed or built-in UPS for use in low-voltage distribution systems and that are intended to be installed in an area accessible by an ordinary person or in a restricted access area as applicable, that deliver fixed frequency AC output voltage with port voltages not exceeding 1 000 V AC or 1 500 V DC and that include an energy storage device. It…

IEC 62608-2:2017 specifies the operational model for home network configuration. In the home network, various CE devices that have distinctive functions are connected on a shared network. However, there is no manager in the home network. Thus, a standardized network management procedure is required for suitable network operation. This document specifies the management procedure as sequences. The…

IEC 62481-1-2:2017 introduces a number of device classes to identify specific roles that connected endpoints implement in the network. Devices can act as content sources (e.g., Digital Media Servers, Push Controllers), and as content sinks (Digital Media Renderers or Digital Media Players). This document addresses this issue and, specifically, it describes a device class for an Extended Digital…

1 Scope 1.1 This standard applies to network-connectable products that shall be evaluated and tested for vulnerabilities, software weaknesses and malware. 1.2 This standard describes: a) Requirements regarding the software developer (vendor or other supply chain member) risk management process for their product. b) Methods by which a product shall be evaluated and tested for the presence of…

1.1 This Standard specifies safety requirements for pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems in health care facilities, both public and private. It applies to all facilities providing health care services, regardless of type, size, location, or range of services, including, but not limited to a) acute care hospitals; b) in-…

This Standard sets forth the minimum requirements for containment sumps, and associated sump fittings and accessories (products) intended for below- or at-grade use as an enclosure for housing of, and access to, underground piping, connector piping, and other fueling system components (such as pumps, valves, sensors, wiring, etc.) in addition to temporary containment of typical liquid fuels as…

IEC 60601-1:2005+AMD1:2012, 1.1 is replaced by: This part of ISO 80601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of a VENTILATOR in combination with its ACCESSORIES, hereafter referred to as ME EQUIPMENT: — intended for use in the HOME HEALTHCARE ENVIRONMENT; — intended for use by a LAY OPERATOR; — intended for use with PATIENTS who are dependent on mechanical ventilation for…