Electricity metering equipment - Particular requirements - Part 22: Static meters for AC active ener...
IEC 62053-22:2020 applies only to transformer operated static watt-hour meters of accuracy classes 0,1 S, 0,2 S and 0,5 S for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests only.
This document applies to electricity metering equipment designed to:
• measure and control electrical energy on electrical networks (mains…
Équipement de comptage de l'électricité - Exigences particulières - Partie 22: Compteurs statiq...
IEC 62053-22:2020 est applicable uniquement aux compteurs statiques d'énergie active alimentés par transformateurs des classes de précision 0,1 S, 0,2 S et 0,5 S, destinés à la mesure de l'énergie électrique active en courant alternatif sur les réseaux électriques en 50 Hz et 60 Hz, et à leurs essais de type.
NOTE 1 Pour d'autres exigences générales, notamment en matière de…
Electricity metering equipment - Particular requirements - Part 23: Static meters for reactive energ...
IEC 62053-23:2020 applies only to static var-hour meters of accuracy classes 2 and 3 for the measurement of alternating current electrical reactive energy in 50 Hz or 60 Hz networks and it applies to their type tests only.
For practical reasons, this document is based on a conventional definition of reactive energy for sinusoidal currents and voltages containing the fundamental frequency only.…
Equipement de comptage de l'électricité - Exigences particulières - Partie 23: Compteurs statiq...
IEC 62053-23:2020 est applicable uniquement aux compteurs statiques d'énergie réactive des classes de précision 2 et 3, destinés à la mesure de l'énergie électrique réactive en courant alternatif sur les réseaux électriques en 50 Hz et 60 Hz, et à leurs essais de type.
Pour des raisons pratiques, le présent document repose sur une définition conventionnelle de l'énergie réactive…
Electricity metering equipment - Particular requirements - Part 24: Static meters for fundamental co...
IEC 62053-24:2020 applies only to static var-hour meters of accuracy classes 0,5S, 1S, 1, 2 and 3 for the measurement of alternating current electrical reactive energy in 50 Hz or 60 Hz networks and it applies to their type tests only.
This document uses a conventional definition of reactive energy where the reactive power and energy is calculated from the fundamental frequency components of the…
Equipement de comptage de l'électricité - Exigences particulières - Partie 24: Compteurs statiq...
IEC 62053-24:2020 est applicable uniquement aux compteurs statiques d'énergie réactive des classes de précision 0,5S, 1S, 1, 2 et 3, destinés à la mesure de l'énergie électrique réactive en courant alternatif sur les réseaux électriques en 50 Hz et 60 Hz, et à leurs essais de type.
Le présent document est fondé sur une définition conventionnelle de l'énergie réactive pour laquelle…
Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 1: General descrip...
This document specifies three methods for measuring the volume flow rate and one method each for measuring the base pressure, the compression ratio, and the critical backing pressure of a vacuum pump.
The first method for measuring the volume flow rate (the throughput method) is the basic concept, in which a steady gas flow is injected into the pump while the inlet pressure is measured. In…
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety ...
IEC 62841-3-7:2020 This document applies to transportable wall saws guided by a track guiding system intended for dry cutting or to be connected to a liquid system for cutting concrete, stone or similar material by means of a diamond wheel. The rated speed of the diamond wheel does not exceed a peripheral speed of 100 m/s at rated capacity.
The rated voltage is not more than 250 V for single-…
Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General r...
IEC 60352-4:2020 is applicable to non-accessible ID connections for which the tests and measurements according to Clauses 6 through 8 are suitable and which are made with:
– appropriately designed ID terminations;
– wires having solid round conductors of 0,25 mm to 3,6 mm nominal diameter;
– wires having stranded conductors of 0,05 mm2 to 10 mm2 cross-sectional area;
for use in electrical and…
Connexions sans soudure - Partie 4: Connexions autodénudantes (CAD) non accessibles sans soudure - R...
IEC 60352-4:2020 is applicable to non-accessible ID connections for which the tests and measurements according to Clauses 6 through 8 are suitable and which are made with:
– appropriately designed ID terminations;
– wires having solid round conductors of 0,25 mm to 3,6 mm nominal diameter;
– wires having stranded conductors of 0,05 mm2 to 10 mm2 cross-sectional area;
for use in electrical and…
