Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless ...
IEC/IEEE 62704-1:2017(E) defines the methodology for the application of the finite-difference time domain (FDTD) technique when used for determining the peak spatial-average specific absorption rate (SAR) in the human body exposed to wireless communication devices with known uncertainty. It defines methods to validate the numerical model of the device under test (DUT) and to assess its…
Cleanrooms and associated controlled environments — Part 15: Assessment of suitability for use of eq...
ISO 14644-15:2017 provides requirements and guidelines for assessing the chemical airborne cleanliness of equipment and materials which are foreseen to be used in cleanrooms and associated controlled environments which are linked to the ISO standard for cleanliness classes by chemical concentration (see ISO 14644‑8).
The following are outside the scope of ISO 14644-15:2017:
- health and…
Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless ...
IEC/IEEE 62704-3:2017 defines the concepts, techniques, benchmark phone models, validation procedures, uncertainties and limitations of the finite difference time domain (FDTD) technique when used for determining the peak spatial-average specific absorption rate (SAR) in standardized head and body phantoms exposed to the electromagnetic fields generated by wireless communication devices, in…
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principle...
ISO 22007-1:2017 describes the background to methods for the determination of the thermal conductivity and thermal diffusivity of polymeric materials. Different techniques are available for these measurements and some may be better suited than others for a particular type, state and form of material. ISO 22007-1:2017 provides a broad overview of these techniques. Standards specific to these…
Essais non destructifs des assemblages soudés — Contrôle par ultrasons — Techniques, niveaux d'...
L'ISO 17640 :2017 spécifie des techniques de contrôle manuel par ultrasons des assemblages en matériaux métalliques soudés par fusion, d'épaisseur égale ou supérieure à 8 mm, présentant une atténuation relativement faible des ultrasons (en particulier celle due à la diffusion) à des températures d'objet comprises entre 0 °C et 60 °C. Elle vise particulièrement les assemblages…
Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
ISO 17640:2017 specifies techniques for the manual ultrasonic testing of fusion-welded joints in metallic materials of thickness ≥8 mm which exhibit low ultrasonic attenuation (especially that due to scatter) at object temperatures from 0 °C to 60 °C. It is primarily intended for use on full penetration welded joints where both the welded and parent material are ferritic.
Where material-dependent…
Information technology — Security techniques — Guidance for the production of protection profiles an...
ISO/IEC TR 15446 provides guidance relating to the construction of Protection Profiles (PPs) and Security Targets (STs) that are intended to be compliant with the third edition of ISO/IEC 15408 (all parts). It is also applicable to PPs and STs compliant with Common Criteria Version 3.1 Revision 4[6], a technically identical standard published by the Common Criteria Management Board, a consortium…
Information technology - Security techniques - Guidance for the production of protection profiles an...
ISO/IEC TR 15446 provides guidance relating to the construction of Protection Profiles (PPs) and Security Targets (STs) that are intended to be compliant with the third edition of ISO/IEC 15408 (all parts). It is also applicable to PPs and STs compliant with Common Criteria Version 3.1 Revision 4[6], a technically identical standard published by the Common Criteria Management Board, a consortium…
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnost...
ISO 13373-9 specifies procedures to be considered when carrying out vibration diagnostics of various types of electric motors. The four motor types covered by ISO 13373-9 are squirrel-cage induction, wound-rotor induction, salient-pole and DC motors.
NOTE The first two types are defined in ISO 20958.
ISO 13373-9 is mostly applicable to motors with power above 15 kW.
ISO 13373-9 is intended…
Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Envi...
IEC 60794-1-22:2017 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
IEC 60794-1-22:2017 defines test procedures to be used in establishing uniform requirements for the environmental…
