Manual on Industrial Radiography
Part Ii
Chapter 8: Techniques and Procedures
8.1 Introduction
The technique used to radiograph a specimen generally refers to the sum total
of all procedures, equipment and accessories used to examine it. This chapter
deals primarily with the geometrical considerations, i.e., the positioning and
orientation of the source of radiation energy, in relation to the specimen and
the film. Each arrangement is unique to the shape of the…
Manual on Industrial Radiography
Part IIi
Chapter 10: Essentials of the Metal-Shaping Processe...
10.1 Introduction
Several metal-shaping processes are in use in modern manufacturing industries.
Industrial radiographers may be called upon to examine parts either during the
manufacturing process, or at the assembly stage, as well as when the parts are
used in service.
Some aspects of the "casting" and "forging" processes that are necessary for
the routine…
1. Scope
1.1 This standard specifies the requirements for two types of
detergent-resistant water-emulsion floor polish suitable for general
application on most floors other than wood and on sealed wood floors.
It should not be used on unsealed wood, cork or magnesite floors. The
floor finish may be maintained by spray buffing techniques using…
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification fo...
IEC 60603-2:1995 applies to groups of related connectors for use with printed boards. They range from connectors with high contact density for low-voltage applications (Styles B and C) to connectors for heavy currents and high voltages having fewer contacts (Styles D, E, F, G and H). It also applies to Style M two-part connectors supplied in alternative versions having 2, 4 or 6 holes for fitting…
Connecteurs pour fréquences inférieures à 3 MHz pour utilisation avec cartes imprimées - Partie 2: S...
IEC 60603-2:1995 s'applique à des groupes de connecteurs enfichables utilisables avec des cartes imprimées. Ils vont des connecteurs à haute densité de contacts pour les applications à basse tension (modèles B et C), aux connecteurs pour courants forts et tensions élevées qui comportent moins de contacts (modèles D, E, F, G et H). Elle s'applique également aux connecteurs enfichables de…
Compatibilité électromagnétique (CEM) - Partie 2: Environnement - Section 5: Classification des envi...
Cette publication est un rapport technique destiné à servir de guide, et non de spécification, à l'attention des rédacteurs de normes d'immunité concernant un équipement ou un système. Elle a pour objet de classer les environnements électromagnétiques afin de faciliter la spécification des exigences d'immunité applicables à des objets comprenant des parties électriques ou…
1. Scope
1.1 This standard provides minimum requirements for the potency and
specificity of the following four main groupings of reagents to be used
in Canada: ABO; Rh reagents, anti-D; Rh reagents, other than anti-D;
and anti-human globulin reagents.
1.2 These reagents are biological fluids of human or animal origin. They
may be chemically-modified or…
