Rechercher

1 Scope 1.1 Introductioin This document describes the overall UPnP AV Architecture, which forms the foundation for the UPnP AV Device and Service templates. The AV Architecture defines the general interaction between UPnP control points and UPnP AV devices. It is independent of any particular device type, content format, and transfer protocol. It supports a variety of devices such as TVs,…

1 Scope This device specification is compliant with the Universal Plug and Play Device Architecture version 1.0 [14]. It defines a device type referred to herein as MediaRenderer. The MediaRenderer specification defines a general-purpose device template that can be used to instantiate any Consumer Electronics (CE) device that is capable of rendering AV content from the home network. It…

1 Scope This device specification is compliant with the UPnP Device Architecture version 1.0 [14]. It defines a device type referred to herein as MediaServer. The MediaServer specification defines a general-purpose device that can be used to instantiate any Consumer Electronics (CE) device that provides AV content (for example, media) to other UPnP devices on the home network. It is based on…

1 Scope This document defines the layout of the AV Datastructure Template (AVDT) XML document. An AVDT document describes the format requirements and restrictions of various data structures used within the UPnP AV specifications. Although these data structures are defined very precisely in the appropriate service specification, in most cases, each data structure definition allows for a…

1 Scope This service definition is compliant with UPnP Device Architecture version 1.0 [14]. This service type enables control over the transport of audio and video streams. The service type defines a common model for A/V transport control suitable for a generic user interface. It can be used to control a wide variety of disc, tape and solid-state based media devices such as CD players, VCRs…

1 Scope This service definition is compliant with the UPnP Device Architecture version 1.0 [14]. This service-type enables modeling of streaming capabilities of A/V devices, and binding of those capabilities between devices. Each device that is able to send or receive a stream according to the UPnP AV Architecture will have 1 instance of the ConnectionManager service. This service provides a…

1 Scope This document specifies MPEG media transport (MMT) technologies, which include a single encapsulation format, delivery protocols and signalling messages for transport and delivery of multimedia data over heterogeneous packet-switched networks for multimedia services. Types of packet-switched networks supported by this document include bidirectional networks such as Internet Protocol (IP…

1.1 This standard presents methodologies for characterizing and quantifying coarse, fine, and ultrafine particles and volatile organic compound (VOC) emissions from operating three-dimensional (3D) printers under normal conditions of use in defined indoor environments including classroom, office, and residential scenarios. 1.2 This method primarily applies to the emissions of particles and…

1.1 La présente norme décrit les méthodes permettant de caractériser et de quantifier les émissions de particules grossières, fines et ultrafines ainsi que de composés organiques volatils (COV) produites lors de l’utilisation d’imprimantes 3D, dans des conditions normales d’utilisation, au sein de certains environnements intérieurs, y compris les salles de classe et les bureaux, et dans un…

This document specifies elements of communications for localized communications in ITS. In particular, the following architectures, procedures and protocols are specified: — support of communication interfaces (DSRC-CI) using the DSRC application layer specified in ISO 15628; — support of ISO 15628 DSRC applications via an ITS access technology suited for localized…