Rechercher

IEC 62453-302:2023 provides information for integrating the CIP™ technology into the FDT interface specification (IEC 62453‑2). Communication Profile Family 2 (commonly known as CIP™[1]) defines communication profiles based on IEC 61158-2 Type 2, IEC 61158-3-2, IEC 61158-4-2, IEC 61158-5-2, IEC 61158-6-2, and IEC 62026-3. The basic profiles CP 2/1 (ControlNet™[2]), CP 2/2 (EtherNet/IP™[3]), and…

L’IEC 62453-302:2023 fournit des informations sur l’intégration de la technologie CIP™ dans la spécification des interfaces des outils des dispositifs de terrain (FDT) (IEC 62453‑2). La Famille de profils de communication 2 (communément appelée CIP™[1]) définit des profils de communication basés sur les normes IEC 61158‑2 Type 2, IEC 61158‑3‑2, IEC 61158‑4‑2, IEC 61158‑5‑2, IEC 61158‑6‑2 et IEC…

This document specifies technical requirements for independent glazed openings on large yachts, taking into account navigation conditions, the location of the opening and the materials, framing and testing. Large yachts are yachts with length of the hull, LH, higher or equal to 24 m, used for sport or pleasure and commercial operations. This document is suitable for the design of glazed openings…

IEC 61139-3:2023 specifies a wireless single-drop digital communication interface (SDCI wireless). This is an extension to the single-drop digital communication interface (SDCI) technology that is specified in IEC 61131-9. This document specifies the wireless communication services and protocol (physical layer, data link layer and application layer in accordance with the ISO/OSI reference model…

L’IEC 61139:2023 spécifie une interface de communication numérique point à point sans fil (SDCI sans fil). Il s’agit d’une extension de la technologie d’interface de communication numérique point à point (SDCI) qui est spécifiée dans l’IEC 61131-9. Le présent document spécifie les services et le protocole de communication sans fil (couche physique, couche de liaison de données et couche d’…

This document provides a procedure for the standard validation and reporting protocol of walking speed measurements by technological sensor systems compared with the values provided by the reference method, namely walking speed as measured by a tape measure and a stopwatch. It does not address the detailed or specific uses of various technological sensor systems in healthcare.

The ISO/IEC 30108 series defines biometric services used for identity assurance that are invoked over a services-based framework. It provides a generic set of biometric and identity-related functions and associated data definitions to allow remote access to biometric services. Although focused on biometrics, the ISO/IEC 30108 series includes support for other related identity assurance mechanisms…

The ISO/IEC 30108 series defines biometric services used for identity assurance that are invoked over a services-based framework. It provides a generic set of biometric and identity-related functions and associated data definitions to allow remote access to biometric services. Although focused on biometrics, the ISO/IEC 30108 series includes support for other related identity assurance mechanisms…

IEC TS 62607-8-3:2023 This part of IEC 62607, which is a Technical Specification, specifies a measurement protocol to determine the key control characteristics - analogue resistance change, and - resistance fluctuation for nano-enabled metal-oxide interfacial devices by - electrical resistance measurement. Analogue resistance change as a function of applied voltage pulse is measured in metal…

1 Scope 1.1 The requirements of this standard apply to off-board unidirectional and bidirectional equipment rated 1000 Vac and 1500 Vdc or less, that transfers electrical energy between an electric vehicle and off board loads as well as operating in parallel with an electric power system, such as the electric utility grid, using a permanently attached vehicle connector. Equipment that has…