Salles propres et environnements maîtrisés apparentés — Partie 14: Évaluation de l'aptitude à l...
ISO 14644-14:2016 définit une méthodologie pour évaluer l'aptitude de l'équipement (par exemple, machines, équipements de mesure, équipements de procédé, composants, outils) à être employé dans les salles propres et les environnements maîtrisés apparentés, pour ce qui concerne la propreté particulaire de l'air telle que spécifiée dans l'ISO 14644‑1. La taille des particules…
Cleanrooms and associated controlled environments — Part 14: Assessment of suitability for use of eq...
ISO 14644-14:2016 specifies a methodology to assess the suitability of equipment (e.g. machinery, measuring equipment, process equipment, components and tools) for use in cleanrooms and associated controlled environments, with respect to airborne particle cleanliness as specified in ISO 14644‑1. Particle sizes range from 0,1 µm to equal to or larger than 5 µm (given in ISO 14644‑1).
NOTE…
Intelligent transport systems — Traffic and travel information via transport protocol exports group,...
ISO/TS 21219-16:2016 specifies the TPEG application: Fuel price information and availability (FPI). The FPI application has been specifically designed to support information of fuel stations, their location, fuel types offered and fuel pricing and availability information.
Intelligent transport systems — Communications access for land mobiles (CALM) — Communication protoc...
ISO/TS 16460:2016 specifies the following:
- the Localized Message (LM) format: an NPDU of a networking and transport layer protocol that does not support routing of a packet through a network;
- the Service Advertisement Message (SAM): an APDU to be transported in for example, an LM;
- the Service Response Message (SRM): an APDU acknowledging a SAM that offered a service based on…
Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 2: Data link layer
ISO 14230-2:2016 specifies data link layer services tailored to meet the requirements of UART-based vehicle communication systems on K-Line as specified in ISO 14230‑1. It has been defined in accordance with the diagnostic services established in ISO 14229‑1 and ISO 15031‑5, but is not limited to use with them and is also compatible with most other communication needs for in-vehicle networks. The…
Road vehicles — Local Interconnect Network (LIN) — Part 3: Protocol specification
ISO 17987-3:2016 specifies the LIN protocol including the signal management, frame transfer, schedule table handling, task behaviour and status management and LIN master and slave node. It contains also OSI layer 5 properties according to ISO 14229‑7 UDSonLIN-based node configuration and identification services (SID: B016 to B816) belonging to the core protocol specification.
A node (normally a…
Road vehicles — Local Interconnect Network (LIN) — Part 2: Transport protocol and network layer serv...
ISO 17987-2:2016 specifies a transport protocol and network layer services tailored to meet the requirements of LIN‑based vehicle network systems on local interconnect networks. The protocol specifies an unconfirmed communication.
The LIN protocol supports the standardized service primitive interface as specified in ISO 14229‑2.
ISO 17987-2:2016 provides the transport protocol and network layer…
Information technology — Radio frequency identification (RFID) for item management: Data protocol — ...
ISO/IEC 15961-4:2016 provides a set of application commands and their associated responses for the following functions:
- to start and stop battery assistance;
- to select and de-select a particular sensory function supported by the RFID tag;
- to set sensor parameters both initially and ongoing;
- to start and stop the sensor monitoring the environment;
- to access…
Information technology - Radio frequency identification (RFID) for item management: Data protocol - ...
ISO/IEC 15961-4:2016 provides a set of application commands and their associated responses for the following functions:
- to start and stop battery assistance;
- to select and de-select a particular sensory function supported by the RFID tag;
- to set sensor parameters both initially and ongoing;
- to start and stop the sensor monitoring the environment;
- to access…
Industrial communication networks - Profiles - Part 3-17: Functional safety fieldbuses - Additional ...
IEC 61784-3-17:2016 specifies a safety communication layer (services and protocol) based on CPF 17 of IEC 61784-2 (CP 17/1) and IEC 61158 Type 21. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer. This safety communication layer is intended for implementation in safety devices only.
