Rechercher

ISO/TR 19814:2017 provides guidance and recommendations in the planning, implementation, maintenance and improvement of the preservation of archive and library collections through: - recommendations and guidance for preservation planning and ongoing management of physical collections in archives and libraries; - procedures for managing collections in the stacks, research and reading…

ISO 18407:2017 describes the methodologies, procedures, and measurement systems to be used for the measurement of the radiated underwater acoustic sound generated during pile driving using percussive blows with a hammer. A major motivation for undertaking measurements of the sound radiated during percussive pile driving is as part of an assessment of impact on aquatic fauna required by regulatory…

ISO 21748:2017 gives guidance for - evaluation of measurement uncertainties using data obtained from studies conducted in accordance with ISO 5725‑2, and - comparison of collaborative study results with measurement uncertainty (MU) obtained using formal principles of uncertainty propagation (see Clause 14). ISO 5725‑3 provides additional models for studies of intermediate precision.…

ISO 8178-1:2017 specifies the measurement methods for gaseous and particulate exhaust emissions from reciprocating internal combustion (RIC) engines on a test bed, necessary for determining one weighted value for each exhaust gas pollutant. Various combinations of engine load and speed reflect different engine applications (see ISO 8178‑4). ISO 8178-1:2017 is applicable to RIC engines for mobile…

ISO 12614-19:2017 specifies tests and requirements for the automatic valve, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. This document is applicable to vehicles using natural gas in accordance with ISO 15403 (all parts) (mono-fuel, bi-fuel or dual-fuel applications). It is not applicable to the following: a) fuel containers…

ISO 22201-1:2017 is applicable to the product family of passenger and goods/passenger lifts used in residential buildings, offices, hospitals, hotels, industrial plants, etc. This document covers those aspects that it is necessary to address when programmable electronic systems are used to carry out electric safety functions for lifts (PESSRAL). This document is applicable for lift safety…

IEC TR 62357-1:2016(E) provides a clear and comprehensive map of all standards which are contributing to support interactions, in an open and interoperable way, between actors, components and systems in the field of electricity grids from generation to consumers, including transmission and distribution. The document also brings the vision of the path which will be followed by the concerned IEC…

IEC 62351-11:2016 specifies schema, procedures, and algorithms for securing XML documents that are used within the scope of the IEC as well as documents in other domains. This part is intended to be referenced by standards if secure exchanges are required, unless there is an agreement between parties in order to use other recognized secure exchange mechanisms. This part of IEC 62351 utilizes well…

This Guideline has been developed as a complementary document to CSA Z94.3. The purpose of this Guideline is to provide advice for the proper selection of eye and face protection in relation to the specific hazardous activity involved; not all hazards have been identified in this Guideline. For eye and face protection to be effective, it must be properly selected for the job and fitted to the…

ISO 19859:2016 specifies the minimum technical and documentation requirements for the evaluation and procurement of gas turbine systems for electrical power generation. It applies to simple cycle and combined cycle gas turbines for both onshore and offshore applications, where applicable. It also applies to gas turbines used in cogeneration (see ISO 11086:1996, Annex B). Testing of the gas…