Rechercher

1.1 These requirements cover lining systems for new masonry chimneys. 1.2 Liners are for use with gas, liquid and solid fuel fired residential appliances and building heating equipment, where the flue gas temperatures normally do not exceed 650 °C. They are intended for use in accordance with the National Building Code of Canada, CSA B139 – Installation Code for Oil Burning Equipment, CSA…

1.1 This Standard sets forth minimum requirements for emergency breakaway fittings intended only for flammable and combustible liquid service. 1.2 An emergency breakaway fitting is intended for use with dispensing devices to allow separation of the hose nozzle valve and/or hose from the dispenser and prevent loss of liquid in the event that the vehicle drives away before the hose nozzle valve is…

Ce document constitue la norme harmonisée au Groupe CSA et aux UL visant les Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses — Sécurité — Partie 2-5 : Exigences particulières pour les scies circulaires portatives. Il s’agit de la première édition de la CAN/CSA-C22.2 nº 62841-2-5, et de la première édition de l’UL 62841-2-5. Cette norme harmonisée est…

This is the harmonized CSA Group and UL Standard For Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery – Safety – Part 3-10: Particular Requirements for Transportable Cut-Off Machines. It is the First edition of CAN/CSA-C22.2 No. 62841-3-10 and the First edition of UL 62841-3-10. This harmonized standard is based on IEC Publication 62841-3-10: First…

This is the second edition of CAN/CSA-C22.2 No. 61010-2-040, Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard…

This is the first edition of CAN/CSA-C22.2 No. 62109-1, Safety of power converters for use in photovoltaic power systems — Part 1: General requirements, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 62109-1 (first edition, 2010-04). It is one in a series of Standards issued by CSA Group under Part II of the…

This is the first edition of CAN/CSA-C22.2 No. 62109-2, Safety of power converters for use in photovoltaic power systems — Part 2: Particular requirements for inverters, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 62109-2 (first edition, 2011-06). It is one in a series of Standards issued by CSA Group under…

1.1 The requirements of this Standard cover the design and construction of Type B (round or oval) and Type BW Gas Vents. 1.2 Type B Gas Vents are intended for the venting of flue gases having temperatures not exceeding 245 °C, from gas fired appliances certified with draft hoods or diverters. Type B Gas Vents are also intended for use with gas fired appliances, without draft hoods or…

1.1 These requirements cover the design and construction of Type L vents intended for the venting of flue gases having temperatures not exceeding 300 °C, from fuel-burning appliances certified for use with Type L vents. They may also be used where Type B gas vents are used. They are intended for installation in buildings to provide a passageway for conveying flue gases to the outer air from…

ISO/TS 19880-1:2016 recommends the minimum design characteristics for safety and, where appropriate, for performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty land vehicles (e.g. Fuel Cell Electric Vehicles). NOTE These recommendations are in addition to applicable national regulations and codes, which can prohibit certain aspects of this…