Rechercher

This National Standard of Canada is equivalent to International Standard ISO 105-A02:1987. It describes the grey scale for determining changes in colour of textiles in colour fastness tests, and its use. A precise colorimetric specification of the scale is given as a permanent record against which newly prepared working standards and standards that may have changed can be compared.

This National Standard of Canada is equivalent to International Standard ISo 105-B01:1988. 1.1 This part of ISO 105 specifies a method intended for determining the resistance of the colour of textiles of all kinds and in all forms to the action of daylight. 1.2 If there is a possiblity of the sample being photochromic, then the test for photochromism shall be applied additionally (see…

This National Standard of Canada is equivalent to International Standard ISO 105-B02:1988. 1.1 This part of ISO 105 specifies a method intended for determining tCh[Ce resistance of the colour of textiles of all kinds and in all forms to the action of an artificial light source representative of natural daylight (D65). The method is also applicable to white (bleached or optically…

This National Standard of Canada is equivalent to International Standard ISO 105-A03:1987. It describes the grey scale for determining staining of adjacent fabrics in colour fastness tests, and its use. A precise colorimetric specification of the scale is given as a permanent record against which newly prepared working standards and standards that may have changed can be compared.

This National Standard of Canada is based on International Standard IEc 300:1984. It outlines guidelines for the selection and implementation of reliability and maintainability activities, appropriate to each of the defined phases of the life of industrial and commercial products in all technologies.

This National Standard of Canada is equivalent to American National Standards Institute (ANSI) standard T1.601-1988. The scope of this standard is as follows: (1) It describes the transmission technique used to support full-duplex service on a single twisted-wire pair (2) It specifies both the input signal with which the NT must operate and the output signal that the NT must produce (3…

This National Standard of Canada is equivalent to American National Standards Institute (ANSI) standard ANSI T1.602-1989. It specifies the Link Access Procedure on the D-channel, LAPD. The purpose of LAPD is to convey information between layer-3 entities across the ISDn user-network interface using the D-channel. LAPD is a protocol operating at the data link layer of the OSI architecture…

This National Standard of Canada is equivalent to International Standard ISo 8831-1989. 1.1 Scope This International Standard is an application layer standard within the Open Systems Interconnection framework set up by ISO 7498. It defines the concepts and services for job transfer and manipulation. This International Standard requires that the user of JTm - specifies the open…

This National Standard of Canada is equivalent to International Standard ISo 8832-1989. 1.1 Scope This International Standard specifies the behaviour to be exhibited by an implementation claiming to conform to this International Standard. It specifies both dynamic conformance and static conformance. It can be referenced by other OSI Standards (using the notation defined in the JTm…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI/BHMA A156.11-1985. 1.1 This standard establishes requirements for Cabinet Locks used on doors, drawers and furniture. Cycle tests, operational tests, strength tests and finish tests are included. 1.2 Tests described in this Standard are performed under laboratory conditions. In…