Rechercher

Describes presentation of the data elements and maintenance of the directory. The standard data elements included are intended to facilitate interchange of data in international trade. These standard data elements can be used with any method for data interchange on paper documents as well as with other means of data communication. They can be selected for transmission one by one, or used within a…

Specifies methodologies for the evaluation of the systemic toxicity potential of medical devices which release constituents into the body. Includes, in addition, pyrogenicity testing. The methods cited are from international standards, national standards, directives and regulations.

1. Scope 1.1 This standard applies to self-contained household refrigerators and freezers designed to be installed and used in residential occupancies in accordance with the Canadian Electrical Code, Part 1, CSA Standard C22.1, and the National Electrical Code, ANSI/NFPA 70. 1.2 These requirements apply to household refrigerators and freezers intended for connection to 15 or 20 A, 100…

Applies to portable voltage detectors with or without built-in power sources, to be used on electrical systems for voltages of 1 kV to 420 kV a.c. and frequencies from 15 Hz to 60 Hz. For the time being, it has been identified that : - For voltage levels up to 52 kV, the actual standard can be used in its entirety ; - For voltage levels above 52 kV, electric testing procedures are questionable…

1.1 These requirements cover the adaptation of tank assemblies contructed in accordance with the Standards described in Clause 1.2 for the collection and storage of used oil. 1.2 The tanks shall be of the non-pressure type and constructed in accordance with the basic requirements of one of the following Standards: A. ULC-S601 - Standard for Shop Fabricated Steel Abovegound Horizontal…

1. Scope 1.1 These requirements cover single and double wall cylindrical vertical steel non-pressure tanks that are used for the aboveground storage of flammable liquids and combustible liquids such as gasoline, fuel oil, or similar products with a relative density not greater than 1.0. 1.2 Section 3 of these requirements cover single wall tanks. Section 4 of these requirements cover…

1. Scope 1.1 These requirements cover single and double wall cylindrical horizontal steel non-pressure tanks that are used for the aboveground storage of flammable liquids and combustible liquids such as gasoline, fuel oil, or similar products with a relative density not greater than 1.0. 1.2 Section 3 of these requirements cover single wall tanks. 1.3 Section 4 of these requirements…

1.1 These requirements cover humidifiers rated 600 V or less, and intended to be used in accordance with the National Electrical Code (NEC), ANSI/NFPA 70, and the Rules of the Canadian Electrical Code (CEC), Part 1. 1.2 These requirements cover humidifiers intended for residential and commercial use. This includes humidifiers of the centrifugal atomizing type, evaporative-media type,…

This National Standard of Canada is equivalent to International Standard ISO 105-A01:1989. 1.1 This Standard provides general information about the methods for testing colour fastness of textiles for the guidance of users. The uses and the limitations of the methods are pointed out, several terms are defined, an outline of the form of the methods is given and the contents of the clauses…

This National Standard of Canada is equivalent to International Standard ISo 5654/1:1984. It specifies the dimensional, physical and magnetic characteristics of the cartridge, so as to provide physical interchangeability between data processing systems. NOTE - Numeric values in the SI and/or Imperial measurements system in this Standard may have been rounded and therefore are consistent…