Rechercher

This document provides a system for the identification and presentation of information about freight containers. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on the containers themselves. The methods of displaying identification and certain other data (…

fireplaces and appliances intended to be vented through the throat of a masonry fireplace. These appliances are designed for burning solid fuels such as wood and coal. 1.2 This Standard covers catalytic combustors utilized with fireplace inserts. 1.3 Fireplace inserts and hearth-mounted stoves as covered by this standard are not certified for installation in factory-built fireplaces within…

1.1 La présente norme s’applique aux poêles sur socle et aux foyers encastrables préfabriqués pour les foyers en maçonnerie et les appareils dans lesquels l’évacuation d’air se fait par la gorge du foyer en maçonnerie. Ces appareils sont conçus pour brûler des combustibles solides comme du bois et du charbon. 1.2 Cette norme porte sur les chambres de combustion catalytiques utilisées avec les…

1.1 These requirements apply to Factory-Built Type A Chimneys, which do not require field fabrication. The chimneys are typically intended for use with gas and liquid fuel-fired residential appliances and building heating equipment, where the appliance or equipment flue-gas temperatures do not exceed 540 °C. 1.2 The chimneys are typically intended for use in accordance with regulatory Codes,…

1.1 These requirements apply to factory-built chimney assemblies which do not require field fabrication. 1.2 The factory-built chimney assemblies are for use with gas, liquid and solid fuel-fired residential appliances and building heating equipment, where the flue-gas temperatures normally do not exceed 650 ºC. 1.3 The factory-built chimney assemblies are intended for installation and use in…

1.1 These requirements cover the design and construction of Type L vents intended for the venting of flue gases having temperatures not exceeding 300 °C, from fuel-burning appliances certified for use with Type L vents. The vents may also be used where Type B gas vents are used. They are intended for installation in buildings to provide a passageway for conveying flue gases to the outer air…

1.1 The requirements of this Standard cover the design and construction of Type B (round or oval) and Type BW Gas Vents. 1.2 Type B Gas Vents are intended for the venting of flue gases having temperatures not exceeding 245 °C, from gas fired appliances certified with draft hoods or diverters. Type B Gas Vents are also intended for use with gas fired appliances, without draft hoods or…

1.1 These requirements apply to factory-built chimney connectors and wall pass-through assemblies that do not require field fabrication. 1.2 The factory-built chimney connectors and wall pass-through assemblies are for use with gas, liquid and solid-fuel-fired residential appliances and building heating equipment where the flue-gas temperatures do not normally exceed 650 °C. 1.3 Factory-…

1 Scope 1.1 This Standard applies to grounding and bonding equipment for use in accordance with CSA C22.1, Canadian Electrical Code, Part I in Canada, the National Electrical Code, NFPA 70, in the United States, or the Standard for Electrical Installations, NOM-001-SEDE, in Mexico. 1.2 This Standard applies to the following grounding and bonding equipment: a) ground clamps, bonding devices,…

1 Scope 1.1 These fuseholders and devices accommodate fuses to be employed in electrical circuits and are intended to be used in accordance with the Canadian Electrical Code, Part I (CE Code Part I), CSA C22.1, the National Electrical Code, NFPA 70, or the Mexican Electrical Code, NOM-001. 1.2 These requirements cover: a) Fuseholders for fuses intended for use with fuse classes covered in…