Rechercher

This National Standard of Canada is equivalent to International Standard CEI/IEC 601-2-22:1995, (second edition, 1995-11). 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular International Standard applies to LASER EQUIPMENT FOR MEDICAL APPLICATIONS, as defined in 2.1.111 classified as a CLASS 3B or 4 LASER PRODUCT…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-2-40:1998, (first edition, 1998-02). 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard applies to ELECTROMYOGRAPHS as defined in 2.1.101 and EVOKED RESPONSE EQUIPMENT as defined in 2.1.102, hereinafter referred to as…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-24:1998, first edition, 1998-02. 1 Scope and object This clause of the General Standard and this clause of the Collateral Standard IEC 60601-1-2 apply, except as follows: 1.1* Scope Addition: This Particular Standard specifies the requirement for INFUSION PUMPS, INFUSION CONTROLLERS, SYRINGE PUMPS and PUMPS…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-46:1998, (first edition, 1998-06). 1.1 Scope Addition: This Particular Standard specifies safety requirements for OPERATING TABLES, as defined in 2.12.101, whether or not having electrical parts, including TRANSPORTERS, as defined in 2.12.104, used for the transportation of the table top to or from the base or…

This National Standard of Canada is equivalent to International Standard ISO 14937:2000. 1 Scope 1.1 This International Standard specifies general requirements for the characterization of a sterilizing agent, and for the development, validation and routine control of a sterilization process for medical devices. 1.2 This International Standard applies to sterilization processes in…

This National Standard of Canada is equivalent to International Standard ISO/TR 14049:2000. 1 Scope This Technical Report provides examples about practices in carrying out an Life Cycle Inventory analysis (LCI) as a means of satisfying certain provisions of ISO 14041. These examples are only a sample of the possible cases satisfying the provisions of the standard. They should be read as…

This National Standard of Canada is equivalent to International Standard ISO/IEC 8480:1995. 1 Scope This International Standard specifies the procedures for back-up operation applicable to data transmission on a leased line when implemented through a single interface, controlling both the leased and the back-up facilities, using ITU-T Recommendation V.24 interchange circuits in…

This National Standard of Canada is equivalent to International Standard ISO/IEC 8481:1996. 1 Scope This International Standard describes an arrangement for interconnection of Data Terminal Equipment (DTE), without intermediate Data Circuit-terminating Equipment (DCE), in terms of electrical, mechanical, and functional characteristics. This International Standard applies to DTEs with…

This National Standard of Canada is equivalent to International Standard ISO/IEC 8482:1993. 1 Scope 1.1 This International Standard specifies the medium characteristics for - twisted pair multipoint interconnections in either 2-wire or 4-wire network topology in order to provide for half duplex or duplex data transmission capability, respectively; - a binary and bi-directional signal…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 11187-2:1996. 1 Scope 1.1 General The concept of Profiles for OSI, and the structure of the International Standardized Profiles that document them, are defined in ISO/IEC TR 10000-l. Such Profiles are divided into a number of different classes and sub-classes. Two of these classes contain sub-classes…