Rechercher

This National Standard of Canada is equivalent to International Standard IEC 60601-2-43:2000 (first edition, 2000-06). 1 Scope and object This clause of the General Standard applies, except as follows: 1.1 Scope Addition: This Particular Standard applies to X-RAY EQUIPMENT declared by the MANUFACTURER to be suitable for prolonged RADIOSCOPICALLY GUIDED INTERVENTIONAL PROCEDURES. Its scope…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-44:2001 (second edition, 2001-06). 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard applies to X-RAY EQUIPMENT for COMPUTED TOMOGRAPHY (CT SCANNERS). It includes safety requirements for the X-RAY GENERATOR, and those where HIGH…

This National Standard of Canada is equivalent to International Standard CEI/IEC 601-2-38:1996 (first edition, 1996-10). 1 Scope and object This clause of the General Standard applies, except as follows: 1.1 Scope Addition: This Particular Standard specifies requirements for safety of ELECTRICALLY OPERATED HOSPITAL BEDS, hereinafter referred to as BED, as defined in 2.2.101. 1.2 Object…

This National Standard of Canada is based on International Standard ISO 15078:1998 (first edition, 1998-07-01). 1 Scope This International Standard specifies the operational pattern for log loader controls. Two alternative two-lever systems are specified. This International Standard applies to two-lever control systems for grapple-type log loaders used in mobile and self-propelled…

Applies to compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV), e.g. buried cables or cables installed in buildings, having - conductors complying with IEC 60228 and IEC 60228A with cross-sectional areas 10 mm2 and greater for copper and 16 mm2 and greater for aluminium, - a maximum continuous conductor temperature not exceeding 90 °C. This standard…

1. SCOPE 1.1 Organization and Content - This standard sets out requirements for the design and manufacture of packaging used for the transportation of infectious substances, diagnostic specimens, biological products or (bio) medical waste. There are three categories of packaging: Type 1A (UN Standard Infectious Substance Packaging), Type 1B and Type 1C. UN Standard Infectious Substance Packaging…

This National Standard of Canada is based on International Standard CEI/IEC 60871-1:1997 (second edition, 1997-10). 1 Scope and object This part of IEC 60871 is applicable to both capacitor units and capacitor banks intended to be used, particularly, for power-factor correction of a.c. power systems having a rated voltage above 1 000 V and frequencies of 15 Hz to 60 Hz. This part of IEC…

This National Standard of Canada is based on International Standard ISO 10079-2:1999 (second edition, 1999-08-15). 1 Scope This part of ISO 10079 specifies safety and performance requirements for manually powered medical suction equipment intended for oro-pharyngeal suction. It covers equipment operated by foot or by hand or both (see Figure 1). Non-electrical suction equipment which may be…

This National Standard of Canada is based on International Standard ISO 10079-3:1999 (second edition, 1999-08-15). 1 Scope This part of ISO 10079 specifies safety and performance requirements for medical suction equipment powered from a vacuum or pressure source (see Figure 1). In particular it applies to connections for pipelines and Venturi attachments. Suction equipment with components…

This National Standard of Canada is based on International Standard ISO 5361:1999, first edition). 1 Scope This International Standard specifies requirements for the dimensions, basic properties and method of size designation of the most commonly used types of oro-tracheal and naso-tracheal tube made of plastics materials and/or rubber (plain and cuffed), and requirements for tracheal tube…