1 Scope
1.1
This Code applies to
(a) the installation of appliances, equipment, components, and accessories where oil is used for fuel
purposes such as
(i) forced-air furnaces;
(ii) boilers;
(iii) domestic water heaters;
(iv) vehicle heaters; and
(v) emergency power supplies for buildings;
(b) the installation of all stationary and portable oil-burning equipment, including fuel…
Electromagnetic Compatibility (EMC) - Part 2-4: Environment - Compatibility Levels in Industrial Pla...
This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-2-4:2002 (second edition, 2002-06).
1 Scope
This part of IEC 61000 is concerned with conducted disturbances in the frequency range from 0 kHz to 9 kHz. It gives numerical compatibility levels for industrial and non-public power distribution systems at nominal voltages up to 35 kV and a nominal frequency of 50…
Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the Emission Le...
This National Standard of Canada is equivalent to International Standard CEI/IEC 1000-2-6:1995 (first edition, 1995-09).
1 Scope
This technical report recommends the procedures to assess the disturbance levels produced by the emission of the devices, equipment and systems installed in non-public networks in industrial environment as far as the low-frequency conducted disturbances in the power…
Sterilization of Health Care Products - Chemical Indicators - Guidance for Selection, Use and Interp...
This National Standard of Canada is equivalent to International Standard ISO 15882:2003 (first edition, 2003-03-15).
1 Scope
This International Standard provides guidance for the selection, use and interpretation of results of chemical indicators used in process definition, validation, and routine monitoring and control of sterilization processes.
This International Standard is…
This is a Tri-National standard, with ANCE NMX-J-162-2004 and UL 98.
1 Scope
1.1
These requirements cover individually enclosed air switches, rated 4000 A or less at 600 V or less, having all current-carrying parts enclosed, manually operable by means of external handles, and intended to be employed in accordance with the national installation codes listed in Appendix B, Ref. No.1.
1.1.1 As…
Identification Cards - Integrated Circuit(s) Cards with Contacts - Part 8: Security Related Interind...
This National Standard of Canada is equivalent to International Standard ISO/IEC 7816-8:1999.
1 Scope
This part of ISO/IEC 7816 specifies: - security protocols for use in cards; - secure messaging extensions; - the mapping of the security mechanisms on to the card(s) security functions/services, including a description of the in-card security mechanisms; - data elements for…
Information technology - Home electronic system - Guidelines for product interoperability - Part 1: ...
Specifies requirements for product interoperability in the area of home and building automation systems, with sufficient detail needed to design interoperable Home Electronic System products. The widespread development of many national standard and proprietary networks within and to the home has necessitated a standard for interoperability among home system applications and products from multiple…
This is a Tri-national standard with ANCE NMX-J-023/1 and UL 514A.
1 Scope
1.1
This standard applies to metallic OUTLET BOXES, flush-DEVICE BOXES, FLOOR BOXES, CONCRETE BOXES, EXTENSION RINGS, covers, CONDUIT BODIES, BAR HANGERS, bar-hanger assemblies, and all accessories whose principal function is for support of boxes. The products covered by this standard are intended for installation in…
This is a Tri-national standard with ANCE NMX-J-017 and UL 514B.
1 Scope
1.1
These requirements cover FITTINGS for use with cable and conduit intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code (CEC), Part I, CSA C22.1, and the Standard for Electrical Installations, NOM-001-SEDE.
1.2
These requirements cover CONDUIT LOCKNUTS,…
Hardware for the Support of Conduit, Tubing, and Cable
This is a Bi-national standard with UL 2239.
1 Scope
1.1
These requirements cover hardware for the support of conduit, tubing, and cable, such as HANGERS, STAPLES, STRAPS, and similar devices for installation in accordance with the National Electrical Code, NFPA 70, and the Canadian Electrical Code (CEC), Part I.
1.2
These requirements also cover STANDOFFS for nonmetallic-sheathed cable and…