This CSA Standard is joint with both UL 486D and NMX-J-519-ANCE-05.
1 Scope
1.1
The requirements in this standard cover sealed wire connector systems, including insulating caps, covers, resins, tubing, and tapes provided with, or for use with, specific wire connectors. These systems are intended for wet or damp locations, and other installations such as direct burial, below grade, or above…
1.1 Scope
1.1.1This standard applies to newly produced vented gas fireplace heaters (See Part IV, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials:
a.For use with natural gas;
b.For use with liquified petroleum (propane);
c.Direct vent appliances for manufactured home (USA only) or mobile home OEM installation convertible…
1. Scope
1.1
This Standard covers commercial, freestanding, under-counter, and counter-insert dishwashers,utensil-washers, and glass washers using water as the principal cleaning medium, hereafter referred to as dishwashers. These dishwashers utilize steam, gas, or electric heaters for heating water. Heated water is provided to a dishwasher by means of steam, gas, or electric heating systems…
Washer-disinfectors — Part 5: Test soils and methods for demonstrating cleaning efficacy
ISO/TS 15883-5:2005 includes the test soils and methods that can be used to demonstrate the cleaning efficacy of washer-disinfectors (WD) according to the ISO 15883 series of standards.
The inclusion of the test soils and methods in ISO/TS 15883-5:2005 does not indicate that they are of equivalent sensitivity in their determination of cleaning efficacy.
Acceptance criteria are included, based…
1.1 Scope
1.1.1 This standard applies to newly produced compact cooking gas appliances (see Part IV,
Definitions) hereinafter referred to as units or appliances, constructed of entirely new, unused
parts and materials, intended for installation in recreational vehicles, including recreational
park trailers:
a. For use with propane gases only; or
b. For use with natural gas convertible for use…
Quality Management Systems - Fundamentals and Vocabulary
This National Standard of Canada is equivalent to International Standard ISO 9000:2005.
1 Scope
This International Standard describes fundamentals of quality management systems, which form the subject of the ISO 9000 family, and defines related terms.
This International Standard is applicable to the following:
a) organizations seeking advantage through the implementation of a quality…
Hand-Held Motor-Operated Electric Tools - Safety - Part 2-19: Particular Requirements for Jointers
This National Standard of Canada is joint with UL 60745-2-19.
1 Scope
This clause of Part 1 is applicable, except as follows:
1.1 Addition: This standard applies to jointers for cutting into wood or similar material.
Medical Electrical Equipment - Part 1-8: General Requirements for Safety - Collateral Standard: Gene...
This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-1-8:2005.
Scope
This collateral standard specifies requirements for ALARM SYSTEMS and ALARM SIGNALS in MEDICAL ELECTRICAL EQUIPMENT and MEDICAL ELECTRICAL SYSTEMS. It also provides guidance for the application of ALARM SYSTEMS.
Medical Electrical Equipment - Part 1-6: General Requirements for Safety - Collateral Standard: Usab...
This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-1-6:2004.
Scope
This Collateral Standard specifies requirements for a PROCESS to analyse, design, verify and validate the USABILITY, as it relates to SAFETY of MEDICAL ELECTRICAL EQUIPMENT, hereinafter referred to as EQUIPMENT. This standard addresses NORMAL USE and USE ERRORS but excludes ABNORMAL USE.
1 Scope
1.1
This Standard applies to the design, installation, operation, maintenance, and testing of emergency generators and associated equipment for providing an emergency power supply to electrical loads in buildings and facilities when the normal power supply fails and an emergency power supply is required by the National Building Code of Canada (NBC).
Notes:
(1) For guidelines on…