Rechercher

Scope 1.1 This Standard specifies the requirements for low-halogen aboveground (Type AG) reinforced thermosetting resin conduit (RTRC) and fittings for installation and use in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I, and NFPA 70, National Electrical Code (NEC), in non-hazardous locations. 1.2 The products specified in this Standard are intended for use at -40°C (-…

Scope 1.1.1 This standard applies to manually-operated gas valves (see Part IV, Definitions), hereinafter referred to as valves, not exceeding 4 in (102 mm) pipe size, and pilot shut-off devices (see Part IV, Definitions), hereinafter referred to as devices. Except for hose end valves not intended for permanent connection to a hose, and appliance connector valves, these valves and devices are…

This Standard specifies a method of test and criteria for the determination of the fire resistance of grease ducts under standardized fire conditions. The requirements are intended to evaluate the ability of the grease duct to resist the spread of fire. This Standard also covers requirements to evaluate the ability of the duct to protect adjacent combustibles from igniting in the event of an…

IEC 61156-3-1:2009(E) determines the layout and style for detail specifications describing multicore and symmetrical pair(s)/quad(s) cables for digital communication in work area wiring. Detail specifications based on the blank detail specification may be prepared by a national standards organization, a manufacturer or a user. This edition constitutes a technical revision. The significant global…

IEC 61156-4-1:2009(E) relates to multicore and symmetrical pair/quad cables for digital communications in riser application. This blank detail specification determines the layout and style for detail specifications describing multicore and symmetrical pair(s)/quad(s) cables for digital communication in riser wiring. Detail specifications based on the blank detail specification may be prepared by…

"This National Standard of Canada is applicable to mobile insulating hoses with fittings used with hydraulic tools and equipment for live working at nominal voltages exceeding 1 kV r.m.s. at power frequency. The use under d.c. conditions is not covered by this Standard. Insulating hoses with fittings are used to provide a connection between the hydraulic tool and the pump which are at…

"This National Standard of Canada is applicable to: insulating gloves and mitts which should normally be used in conjunction with leather protector gloves worn over the insulating gloves to provide mechanical protection; insulating gloves and mitts usable without over-gloves for mechanical protection…

Preface This is the second edition of CSA Z96, High-visibility safety apparel. It supersedes the previous edition published in 2002, and is based on the identically titled American National Standards Institute Standard ANSI/ISEA 107. It is also designed to be in harmony with CEN EN 471. Scope 1.1 This Standard specifies requirements for occupational apparel that is (a) capable of signalling…

Preface This is the harmonized CSA and UL standard for Electrical Quick-Connect Terminals. It is the Second edition of CSA-C22.2 No. 153-09 and the Eighth edition of UL 310. This edition of CSA C22.2 No. 153 supersedes the previous edition published in 1981 under the title Quick-Connect Terminals. This edition of UL 310 supersedes the previous edition published May 27, 2003. Scope 1.1 This…

ISO 8336:2009 specifies methods for the inspection and testing of fibre-cement flat sheets and gives the acceptance conditions for their use in one or more of the following applications: external wall and ceiling finishes; internal wall and ceiling finishes; internal and external backing sheets. Products covered by ISO 8336:2009 can be used for other purposes, provided they comply with the…