Rechercher

IEC/TR 61289:2011(E) is a technical report giving guidelines to personnel in charge of operating high frequency surgical equipment covered by IEC 60601-2-2. It intends enabling them to attain the best conditions of safety and efficiency for their patients and themselves. It will also be useful to scientific/technical staff having responsibility for the maintenance of this equipment. This report…

This International Standard identifies specific test procedures to assist producers and users in the selection and characterization of thermoplastic films in single- or multi-layer form. It is intended to serve as a guide for those films for which there are no existing standards or specifications. NOTE Because of the range of materials used and the wide variety of processes available to…

1 Scope This part of ISO 19901 gives requirements for the design, fabrication, installation, modification and structural integrity management for the topsides structure for an oil and gas platform. It complements ISO 19902, ISO 19903, ISO 19904-1, ISO 19905-1 and ISO 19906, which give requirements for various forms of support structure. Requirements in this part of ISO 19901 concerning…

This part of ISO 19901 gives requirements for the design, fabrication, installation, modification and structural integrity management for the topsides structure for an oil and gas platform. It complements ISO 19902, ISO 19903, ISO 19904-1, ISO 19905-1 and ISO 19906, which give requirements for various forms of support structure. Requirements in this part of ISO 19901 concerning modifications and…

This National Standard of Canada is equivalent to International Standard ISO 14937:2009. 1 Scope 1.1 Inclusions 1.1.1 This International Standard specifies general requirements for the characterization of a sterilizing agent and for the development, validation and routine monitoring and control of a sterilization process for medical devices. NOTE Although the scope of this…

ISO 9836:2011 deals with the definition and calculation of surface area and volume indicators. In defining area measurement, ISO 9836:2011 uses three measurement concepts: the intra-muros and extra-muros concept used in many parts of the world; the wall centre method of measurement used in many parts of the world; variations on these methods to comply with certain…

IEC 60335-2-95:2011 deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase appliances and 480 V for other appliances. It also covers the hazards associated with the movement of these electrically driven garage doors. This standard also applies to…

IEC/TR 61000-3-15:2011(E) is concerned with the critical assessment of existing and emerging national and international standards for single and multi-phase dispersed generation systems up to 75 A per phase, particularly converters connected to the public supply low voltage network. This Technical Report intends to serve as a starting point and to ultimately pave the way for the definition of…

This National Standard of Canada is equivalent to International Standard ISO 14341:2010. 1 Scope This International Standard specifies requirements for classification of wire electrodes and weld deposits in the as-welded condition and in the post-weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 MPa…

1 Scope 1.1 General 1.1.1 This Standard describes essential elements and specific requirements for the planning, design, and construction of health care facilities (HCFs), both public and private. It applies to all facilities providing health care services regardless of type, size, location, or range of services, including (a) acute care hospitals; (b) inpatient continuing care hospitals; (c)…