Rechercher

This standard applies, when required by the relevant product standard, to switchgear and controlgear hereinafter referred to as ²equipment² and intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c. It does not apply to low-voltage switchgear and controlgear assemblies which are dealt with in IEC 60439. NOTE – In certain clauses or…

Scope 1.1 These requirements cover FITTINGS for use with cable and conduit intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code (CEC), Part I, CSA C22.1, and the Standard for Electrical Installations, NOM-001-SEDE. 1.2 These requirements cover CONDUIT LOCKNUTS, conduit BUSHINGS, metal stud BUSHINGS, CONDUIT BODIES, and entrance…

The purpose of ISO 28842:2013 is to provide sufficient information to perform the design of the structural concrete bridge that complies with the limitations established in ISO 28842:2013. The rules of design as set forth in ISO 28842:2013 are simplifications of more elaborate requirements. ISO 28842:2013 can be used as an alternative to the development of a national concrete bridge design and…

IEC 60601-1-9:2007+A1:2013 The objective of this collateral standard is to improve the environmental impact for the entire range of medical electrical equipment, taking into account all stages of the product life cycle: - product specification; - design; - manufacturing; - sales, logistics, installation; - use; - end of life management. This means protecting the environment and human health…

The test specified in ISO 22899-1 is designed to give an indication of how passive fire protection materials will perform in a jet fire. ISO/TR 22899-2:2013 provides: background information on the applicability and validation of the jet fire test; further details on testing pipe penetration seals; guidance on the interpretation of the tests results and on an optional classification system;…

Scope 1.1 This standard applies to metallic and nonmetallic cover plates and associated gaskets for flush-mounted wiring devices intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70, and the Canadian Electrical Code, Part I, CSA C22.1, General Requirements - Canadian Electrical Code, Part II, CSA C22.2 No. 0-10. 1.2 This standard also applies to outlet…

IEC/TS 62720:2013 specifies identifiers for units to support computer-based processing of product data. It provides a survey of quantities with associated collections of internationally standardized as well as non-standardized units used in business and science. It concerns any standard or non-standard units of measure currently in use, in two or more distinct ethno-linguistic groups or nations,…

The purpose of ISO 28841:2013 is to provide sufficient information to perform the seismic assessment and rehabilitation of the structural concrete building that complies with the limitations established in ISO 28841:2013, for both undamaged structures that are deemed not to comply with the required characteristics for an adequate response at a specified performance level, and for structures that…

1 Scope This National Standard of Canada applies to Research Ethics Boards (REBs) that evaluate applications for ethical acceptability. If an REB grants ethics approval to conduct biomedical clinical trials, it will provide research ethics oversight of biomedical clinical trials that are subject to the Food and Drugs Act and applicable Regulations (see 2.1). This Standard does not preclude…

IEC 62287-1:2010+A1:2013 specifies the minimum operational and performance requirements, methods of testing and required test results for Class B shipborne AIS equipment using CSTDMA techniques. This standard takes into account other associated IEC International Standards and existing national standards, as applicable. It is applicable for AIS equipment used on craft that are not…