Rechercher

This Standard provides requirements for the design and evaluation of building components of fibre-reinforced polymers (FRP) in buildings and of building components reinforced with FRP materials. It is based on limit states design principles and is consistent with the National Building Code of Canada. This Standard does not apply to the design of fibre-reinforced concrete (FRC), except for FRC…

1 Scope 1.1 These requirements cover single pole locking-type separable attachment plugs, cord connectors, panel inlets, and panel outlets, adapters, and accessories, rated up to a maximum of 800 amperes and up to 600 volts ac or dc and not intended for connection or disconnection under load conditions. 1.2 These devices are intended to provide power from feeders or branch circuits, or…

1 Scope This part of IEC 62368 is applicable to the safety of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a rated voltage not exceeding 600 V. This standard does not include requirements for performance or functional characteristics of equipment. NOTE 1 Examples of equipment within…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric thermal-storage room heaters for household and similar purposes that are intended to heat the room in which they are located, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric air-cleaning appliances for household and similar purposes, their rated voltage being not more than 250 V for singlephase appliances and 480 V for other appliances. Appliances not intended for normal household use but that nevertheless may be a source of danger to…

IEC/TR 61289:2011(E) is a technical report giving guidelines to personnel in charge of operating high frequency surgical equipment covered by IEC 60601-2-2. It intends enabling them to attain the best conditions of safety and efficiency for their patients and themselves. It will also be useful to scientific/technical staff having responsibility for the maintenance of this equipment. This report…

This International Standard identifies specific test procedures to assist producers and users in the selection and characterization of thermoplastic films in single- or multi-layer form. It is intended to serve as a guide for those films for which there are no existing standards or specifications. NOTE Because of the range of materials used and the wide variety of processes available to…

1 Scope This part of ISO 19901 gives requirements for the design, fabrication, installation, modification and structural integrity management for the topsides structure for an oil and gas platform. It complements ISO 19902, ISO 19903, ISO 19904-1, ISO 19905-1 and ISO 19906, which give requirements for various forms of support structure. Requirements in this part of ISO 19901 concerning…

This part of ISO 19901 gives requirements for the design, fabrication, installation, modification and structural integrity management for the topsides structure for an oil and gas platform. It complements ISO 19902, ISO 19903, ISO 19904-1, ISO 19905-1 and ISO 19906, which give requirements for various forms of support structure. Requirements in this part of ISO 19901 concerning modifications and…

This National Standard of Canada is equivalent to International Standard ISO 14937:2009. 1 Scope 1.1 Inclusions 1.1.1 This International Standard specifies general requirements for the characterization of a sterilizing agent and for the development, validation and routine monitoring and control of a sterilization process for medical devices. NOTE Although the scope of this…