Rechercher

ISO/TS 15638-9:2013 addresses the provision of Remote Tachograph Monitoring and specifies the form and content of such data required to support such systems, and access methods to that data. ISO/TS 15638-9:2013 provides specifications for common communications and data exchange aspects of the application service remote tachograph monitoring that a regulator may elect to require or support as an…

ISO/TS 15638-10:2013 addresses the provision of Emergency messaging system/eCall and specifies the form and content of such data required to support such systems, and access methods to that data. ISO/TS 15638-10:2013 provides specifications for common communications and data exchange aspects of the application service Emergency Messaging System/eCall that a regulator may elect to require or…

ISO/TS 15638-18:2013 addresses the provision of ADR (dangerous goods) and specifies the form and content of such data required to support such systems, and access methods to that data. ISO/TS 15638-18:2013 provides specifications for common communications and data exchange aspects of the application service ADR (dangerous goods) that a regulator may elect to require or support as an option,…

1 SCOPE 1.1 These requirements apply to materials for the fabrication of air duct systems for use in accordance with the requirements in the National Building Code of Canada. The materials covered by these requirements include preformed lengths of flexible or rigid ducts, materials in the form of boards for field fabrication of lengths of rigid ducts, and preformed flexible connectors.

Scope 1.1 These requirements cover FITTINGS for use with cable and conduit intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code (CEC), Part I, CSA C22.1, and the Standard for Electrical Installations, NOM-001-SEDE. 1.2 These requirements cover CONDUIT LOCKNUTS, conduit BUSHINGS, metal stud BUSHINGS, CONDUIT BODIES, and entrance…

This standard applies, when required by the relevant product standard, to switchgear and controlgear hereinafter referred to as ²equipment² and intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c. It does not apply to low-voltage switchgear and controlgear assemblies which are dealt with in IEC 60439. NOTE – In certain clauses or…

The purpose of ISO 28842:2013 is to provide sufficient information to perform the design of the structural concrete bridge that complies with the limitations established in ISO 28842:2013. The rules of design as set forth in ISO 28842:2013 are simplifications of more elaborate requirements. ISO 28842:2013 can be used as an alternative to the development of a national concrete bridge design and…

IEC 60601-1-9:2007+A1:2013 The objective of this collateral standard is to improve the environmental impact for the entire range of medical electrical equipment, taking into account all stages of the product life cycle: - product specification; - design; - manufacturing; - sales, logistics, installation; - use; - end of life management. This means protecting the environment and human health…

The test specified in ISO 22899-1 is designed to give an indication of how passive fire protection materials will perform in a jet fire. ISO/TR 22899-2:2013 provides: background information on the applicability and validation of the jet fire test; further details on testing pipe penetration seals; guidance on the interpretation of the tests results and on an optional classification system;…

Scope 1.1 This standard applies to metallic and nonmetallic cover plates and associated gaskets for flush-mounted wiring devices intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70, and the Canadian Electrical Code, Part I, CSA C22.1, General Requirements - Canadian Electrical Code, Part II, CSA C22.2 No. 0-10. 1.2 This standard also applies to outlet…