Space systems — Space debris mitigation design and operation guidelines for spacecraft
ISO/TR 18146:2015 contains non-normative information on spacecraft design and operational practices for mitigating space debris.
ISO/TR 18146:2015 is a supporting document to the family of international standards addressing space debris mitigation (see 2.2). The purpose of these standards is to minimize the creation of additional space debris by ensuring that spacecraft and launch vehicle orbital…
Enclosures for electrical equipment, environmental considerations
1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in
non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the
provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico’s Electrical Installations,
NOM-001-SEDE, as follows:
a) Enclosures for indoor locations, Types 1, 2, 5, 12, 12K,…
1.1 This Standard applies to electric clothes washing machines and extractors intended to be used in
nonhazardous locations in accordance with the Canadian Electrical Code, Part I (CE Code), and the
(U.S.) National Electrical Code (NEC), on circuits having a nominal voltage not exceeding 600 V.
Note: Wherever practical, for convenience, the term ²appliance² has been used in lieu of ²clothes…
Enclosures for electrical equipment, nonenvironmental considerations
1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in
non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the
provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico’s Electrical Installations,
NOM-001-SEDE, as follows:
a) Enclosures for indoor locations, Types 1, 2, 5, 12, 12K,…
1.1 These requirements cover permanently installed devices, hereafter referred to as dimmers, that
employ a dimming function intended for control of lighting loads of the magnetic ballast, transformer,
electronic ballast, self-ballasted lamp, tungsten-filament type, or light-emitting-diode (LED), and are
intended to be installed in a wallbox or are provided with an enclosure for flush or…
Information technology — IT asset management — Part 2: Software identification tag
ISO/IEC 19770-2:2015 establishes specifications for tagging software to optimize its identification and management.
This part of ISO/IEC 19770 applies to the following.
a) Tag producers: these organizations and/or tools create software identification (SWID) tags for use by others in the market. A tag producer may be part of the software creator organization, the software licensor organization,…
Information technology - IT asset management - Part 2: Software identification tag
ISO/IEC 19770-2:2015 establishes specifications for tagging software to optimize its identification and management.
This part of ISO/IEC 19770 applies to the following.
a) Tag producers: these organizations and/or tools create software identification (SWID) tags for use by others in the market. A tag producer may be part of the software creator organization, the software licensor organization,…
Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethyle...
ISO 15494:2015 specifies the characteristics and requirements for components such as pipes, fittings, and valves made from one of the following materials intended to be used for thermoplastics piping systems in the field of industrial applications above and below ground:
- polybutene (PB);
- polyethylene (PE);
- polyethylene of raised temperature resistance (PE-RT);
-…
ISO 18871:2015 provides methodology for measuring coalbed methane content of coal core samples obtained by coring or sidewall coring during well drilling. It shall be also applied to drill cuttings samples, if the equipment for the determination of the coalbed methane content according to a respective national standard is not available. The selection of the most appropriate method shall consider…
Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1: ITS ser...
ISO 14813-1:2015 provides a description of the primary services that an ITS implementation can provide to ITS users. Those services with a common purpose can be collected together in "'ITS service domains'" and within these there can be a number of "'ITS service groups'" for particular parts of the domain. This part of ISO 14813 identifies thirteen service…