Information technology - IT asset management - Part 2: Software identification tag
ISO/IEC 19770-2:2015 establishes specifications for tagging software to optimize its identification and management.
This part of ISO/IEC 19770 applies to the following.
a) Tag producers: these organizations and/or tools create software identification (SWID) tags for use by others in the market. A tag producer may be part of the software creator organization, the software licensor organization,…
Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethyle...
ISO 15494:2015 specifies the characteristics and requirements for components such as pipes, fittings, and valves made from one of the following materials intended to be used for thermoplastics piping systems in the field of industrial applications above and below ground:
- polybutene (PB);
- polyethylene (PE);
- polyethylene of raised temperature resistance (PE-RT);
-…
ISO 18871:2015 provides methodology for measuring coalbed methane content of coal core samples obtained by coring or sidewall coring during well drilling. It shall be also applied to drill cuttings samples, if the equipment for the determination of the coalbed methane content according to a respective national standard is not available. The selection of the most appropriate method shall consider…
Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1: ITS ser...
ISO 14813-1:2015 provides a description of the primary services that an ITS implementation can provide to ITS users. Those services with a common purpose can be collected together in "'ITS service domains'" and within these there can be a number of "'ITS service groups'" for particular parts of the domain. This part of ISO 14813 identifies thirteen service…
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing require...
IEC/IEEE 60079-30-1:2015 specifies general and testing requirements for electrical resistance trace heaters for application in explosive atmospheres with the exclusion of those for EPL Ga and Da. This standard covers trace heaters that comprise either factory or field (work-site) assembled units, and which may be series trace heaters, parallel trace heaters, trace heater pads, or trace heater…
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing require...
IEC/IEEE 60079-30-1:2015 specifies general and testing requirements for electrical resistance trace heaters for application in explosive atmospheres with the exclusion of those for EPL Ga and Da. This standard covers trace heaters that comprise either factory or field (work-site) assembled units, and which may be series trace heaters, parallel trace heaters, trace heater pads, or trace heater…
Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Par...
ISO 12417-1:2015 specifies requirements for vascular device-drug combination products (VDDCPs) based upon current technical and medical knowledge. VDDCPs are medical devices with various clinical indications for use in the human vascular blood system. A VDDCP incorporates, as an integral part, substance(s) which, if used separately, can be considered to be a medicinal substance or product (drug…
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety ...
IEC 62841-3-10:2015 applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive bonded reinforced wheel of Type 41, or diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm and with a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and…
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety ...
IEC 62841-3-10:2015 applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive bonded reinforced wheel of Type 41, or diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm and with a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and…
Health informatics — Principles and data requirements for consent in the Collection, Use or Disclosu...
ISO/TS 17975:2015 defines the set of frameworks of consent for the Collection, Use and/or Disclosure of personal information by health care practitioners or organizations that are frequently used to obtain agreement to process the personal health information of subjects of care. This is in order to provide an Informational Consent framework which can be specified and used by individual policy…
