Rechercher

1. SCOPE 1.1 This Standard covers the design and construction of aboveground steel non- pressure tanks intended for installation inside or outside buildings and for the storage of: A Combustible liquid intended to be used as heating fuel and/or generator fuel; and B Lubricating oil. NOTE 1: These tanks may also be used for the storage of used oil as a heating and/or generator fuel. For tanks…

1. DOMAINE D'APPLICATION 1.1 La présente norme porte sur la conception et la construction de réservoirs non pressurisés non enterrés en acier destinés à être installés à l'intérieur ou à l'extérieur de bâtiments et au stockage de : A Liquide combustible destiné à être utilisé comme huile de chauffage ou huile pour génératrice; B Huile lubrifiante. REMARQUE 1 : Ces…

1 Scope 1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico's Electrical Installations, NOM-001-SEDE, as follows: a) Enclosures for indoor locations, Types 1, 2,…

1 Scope 1.1 This Standard applies to grounding and bonding equipment for use in accordance with the Canadian Electrical Code, Part I, CSA C22.1, in Canada or the National Electrical Code, NFPA 70, in the United States. 1.2 This Standard applies to the following grounding and bonding equipment: (a) ground clamps, bonding devices, grounding bushings, water-meter shunts, grounding electrodes, and…

1 Scope 1.1 This standard applies to pin and sleeve type plugs, receptacles, power inlets, and connectors, rated up to 800 amperes and up to 600 volts ac or dc, and which may include two or fewer pilot contacts. These devices are intended to provide power from branch circuits, or are for direct connection to the branch circuit in accordance with the Canadian Electrical Code Part I (CEC), C22.1,…

1. SCOPE 1.1 This test method is applicable to materials employed in light diffusers and lenses. 1.2 The testing procedure described herein is intended to assess the propensity of material employed in light diffusers and lenses to fall from its installed position before igniting when subjected to test fire exposure conditions in CAN/ULC-S102, as required in the National Building Code of…

This National Standard of Canada is equivalent to International Standard ISO 19904-1:2006. 1 Scope This part of ISO 19904 provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions: - production; - storage and/or offloading; - drilling and production; -…

This National Standard of Canada is joint with UL 60745-2-5; and both are based on International Standard IEC 60745-2-5. 1 Scope This clause of Part 1 is applicable, except as follows: Addition: This standard applies to all types of circular saws. Circular saws hereinafter will be referred to as saws. This standard does not apply to saws used with abrasive wheels.

This National Standard of Canada is joint with UL 60745-1; and both are based on International Standard IEC 60745-1. 1 Scope This part of IEC 60745 deals with the safety of hand-held motor-operated or magnetically driven electric tools, the rated voltage of the tools being not more than 250 V for single-phase a.c. or d.c. tools, and 440 V for three-phase a.c. tools. So far as is…

This National Standard of Canada is equivalent to International Standard ISO 14971:2007. 1 Scope This International Standard specifies a process for a manufacturer to identify the hazards associated with medical devices, including in vitro diagnostic (IVD) medical devices, to estimate and evaluate the associated risks, to control these risks, and to monitor the effectiveness of the controls…