Rechercher

Scope This National Standard of Canada applies to the minimum requirements for performance of fireline workwear used for the protection against the adverse effects to the firefighter’s body during wildland firefighting, or prescribed fire operations. It also provides guidance for the selection, use, maintenance and retirement of such workwear and for understanding its limitations. This…

Scope 1.1 This Standard specifies the requirements for single-conductor and multiple-conductor thermoset-insulated wires and cables rated 600 V, 1000 V, 2000 V, and 5000 V, for use in accordance with the rules of the Canadian Electrical Code (CEC), Part I, CSA C22.1, in Canada, Standard for Electrical Installations, NOM-001-SEDE, in Mexico, and the National Electrical Code (NEC), NFPA-70, in…

Scope 1.1 This Standard specifies the requirements for 600 V, single-conductor, thermoplastic-insulated wires and cables, for use as follows: a) In Canada, in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I; b) In Mexico, in accordance with NOM-001-SEDE, Standard for Electrical Installations; and c) In the United States, in accordance with ANSI/NFPA 70, National Electrical…

Scope 1.1 This Standard applies to newly produced vented gas fireplace heaters (see Clause 3, Definitions), hereinafter referred to as appliance(s), constructed entirely of new, unused parts and materials, and having input ratings up to and including 400,000 Btu/hr (117 228 W); a) for use with natural gas; b) for use with liquefied petroleum (propane); c) direct vent appliances for…

Scope 1.1 General This standard specifies the requirements for flexible cords, elevator cables, electric vehicle cables, electric vehicle cables, and hoistway cables rated 600 V maximum and intended for use in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I and CAN/CSA-C22.2 No. 0, General Requirements - Canadian Electrical Code, Part II, in Canada, NOM-001-SEDE, La Norma de…

Scope 1.1 This Standard provides general requirements for the design, fabrication, construction, installation, examination, and commissioning as well as the in-service examination, testing, and evaluation of reinforced (prestressed and non-prestressed) concrete containment structures for nuclear power plants designated as class containment. It is directed to the owners/operators, designers,…

This part of IEC 60947 applies to CONTROL CIRCUIT DEVICES and SWITCHING ELEMENTS intended for controlling, signalling, interlocking, etc., of switchgear and controlgear. It applies to CONTROL CIRCUIT DEVICES having a rated voltage not exceeding 1 000 V a.c. (at a frequency not exceeding 1 000 Hz) or 600 V d.c. However, for operational voltages below 100 V a.c. or d.c., see note 2 of 4.3.1.1…

1 Scope 1.1 These requirements cover electrically operated single and multiple station smoke alarms intended for open area protection in indoor locations, in accordance: a) Installation of Smoke Alarms, CAN/ULC-S553; b) National Building Code of Canada; and c) National Fire Code of Canada. 1.2 A single station smoke alarm (e.g. ionization-type, photoelectric-type, smoke alarm with…

1 Domaine d’application 1.1 Les présentes exigences se rapportent aux avertisseurs de fumée électriques dans une configuration à poste simple ou à postes multiples destinés à assurer la protection des aires ouvertes dans les emplacements intérieurs, conformément aux publications suivantes : a) Installation des avertisseurs de fumée, CAN/ULC-S553; b) Code national du bâtiment du Canada; et…

1 Scope 1.1 [Replace this clause with the following] This Standard contains technical requirements and practices including test methods applicable to the design, manufacture/construction, installation, and labelling of corded window covering products. The requirements provided in this Standard are intended to minimize the hazards posed to young children by corded window covering products.…