Rechercher

1.1 This Standard is intended for manufacturers and purchasers of machinery that is sold in, imported to, or exported from Canada. It is also intended for regulators, acoustical professionals, and other interested parties. 1.2 This Standard is intended to provide a) guidance on the steps required to provide and verify noise emission declarations for machinery and equipment intended for the…

1.1 This Standard covers the refurbishing of shop fabricated tanks built to nationally recognized Standards listed in Tank Eligibility Subsections 6.2 and 7.2. NOTE: In the context of this Standard, refurbishing refers to repairs to, and a limited set of modifications of, tanks using materials at least equivalent to those used in the original manufacture and does not include retrofit. Refer to…

1 Scope This International Standard deals with the safety of electric motor-operated or magnetically driven: – HAND-HELD TOOLS (IEC 62841-2); – TRANSPORTABLE TOOLS (IEC 62841-3); – LAWN AND GARDEN MACHINERY (IEC 62841-4). The above listed categories are hereinafter referred to as ²tools² or ²machines². The RATED VOLTAGE is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V…

This is the third edition of CAN/CSA-C22.2 No. 60601-2-11, Medical electrical equipment — Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60601-2-11 (third edition, 2013-01). It supersedes the previous…

This is the first edition of CAN/CSA-C22.2 No. 60601-2-66, Medical electrical equipment — Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60601-2-66 (first edition, 2012–10).…

This is the second edition of CAN/CSA-C22.2 No. 60601-2-24, Medical electrical equipment — Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60601-2-24 (second edition, 2012-10). It supersedes the…

1.1 This Standard applies to newly produced, direct gas-fired industrial air heaters of the non-recirculating type, hereinafter referred to as heaters, whose purpose is to offset building heat loss. All air to the heater is ducted directly from outdoors and the products of combustion generated by the heater are released into the air stream being heated. Heaters covered by this Standard are…

1.1 This Standard applies to newly produced Type 1 clothes dryers (see Clause 3, Definitions), hereinafter referred to as dryers, constructed entirely of new, unused parts and materials: a) for use with natural gas; b) for use with manufactured gas; c) for use with mixed gas; d) for use with propane gas; e) for use with LP gas-air mixtures; and f) for mobile home installation (see Clause 4.1.12…

1.1 This Standard applies to newly produced, direct gas-fired process air heaters of the recirculating or nonrecirculating type (see Clause 3, Definitions), hereinafter referred to as heaters, whose primary purpose is to provide process heating to non-occupied spaces within commercial and industrial buildings and may also include operation as a non-recirculating ventilation air heater (see Clause…

This is the first edition of CAN/CSA-C22.2 No. 60601-1-9, Medical electrical equipment — Part 1-9: General requirements for basic safety and essential performance — Collateral Standard: Requirements for environmentally conscious design, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60601-1-9 (edition 1:2007…