Rechercher

This National Standard of Canada is equivalent to International Standard ISO/IEC 14496-17:2006. 1 Scope This International Standard specifies the coded representation of textual information for timed presentation on screens. The text may be streamed in association with video and audio, in which case the text may represent subtitles e.g. with translations of the associated audio in another…

This National Standard of Canada is equivalent to International Standard ISO/IEC 26905:2006. 1 Scope This Technical Report identifies key use cases for communication with or between IP-based Next Generation Corporate Networks (NGCN) involving public next generation networks (NGN), analyses these use cases in terms of available or planned standardized technology, and identifies requirements that…

This National Standard of Canada is equivalent to International Standard ISO/IEC 17462:2000. 1 Scope This International Standard specifies the physical and magnetic characteristics of a 3,81 mm wide magnetic tape cartridge to enable physical interchangeability of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format…

This National Standard of Canada is equivalent to International Standard ISO/IEC 8825-1:2002. 1 Scope This Recommendation | International Standard specifies a set of basic encoding rules that may be used to derive the specification of a transfer syntax for values of types defined using the notation specified in ITU-T Rec. X.680 | ISO/IEC 8824-1, ITU-T Rec. X.681 | ISO/IEC 8824-2, ITU-T Rec. X.…

1 Scope This document gives the safety requirements and measures to reduce risks related to woodworking machines arising during operation, adjustment, maintenance, transport, assembly, dismantling, disabling and scrapping and which are common to machines used in the woodworking industry. It is applicable to woodworking, stationary and displaceable machines when they are used as intended and…

1.1 These requirements apply to factory-built chimney connectors and wall pass-through assemblies that do not require field fabrication. 1.2 The factory-built chimney connectors and wall pass-through assemblies are for use with gas, liquid and solid-fuel-fired residential appliances and building heating equipment where the flue-gas temperatures do not normally exceed 650 °C. 1.3 Factory-…

1.1 This Standard sets forth minimum requirements for hose and hose assemblies, including vapour recovery hose and assemblies, for use on dispensing devices for flammable and combustible liquids. For the purpose of this Standard flammable and combustible liquids mean gasoline, fuel oil, kerosene and diesel fuel, including gasoline with small amounts of additives such as detergents, solvents for…

1.1 This Standard specifies the requirements for single-conductor and multiple-conductor thermoset-insulated wires and cables rated 600 V, 1000 V, 2000 V, and 5000 V, for use in accordance with the rules of the Canadian Electrical Code, Part I, CSA C22.1, in Canada, Standard for Electrical Installations, NOM-001-SEDE, in Mexico, and the National Electrical Code (NEC), NFPA 70, in the United…

This National Standard of Canada is equivalent to International Standard ISO/IEC 23003-1:2007. 1 Scope This International Standard describes the MPEG Surround standard (Spatial Audio Coding, SAC), that is capable of re-creating N channels based on M<N transmitted channels, and additional control data. In the preferred modes of operating the spatial audio coding system, the M channels can…

This National Standard of Canada is equivalent to International Standard IEC 61010-2-061:2003, second edition. 1 Scope and object This clause of Part 1 is applicable except as follows: 1.1 Scope 1.1.1 Equipment included in scope Replacement: This part of IEC 61010 applies to electrically powered laboratory atomic spectrometers with thermal atomization. NOTE 1 Examples include atomic…