Rechercher

Describes, together with basic noise emission International Standards, the mechanical and acoustical specifications necessary for a reproducible test method for the airborne noise emitted by woodworking machines. Specifies standard operating conditions and microphone positions for the measurement on 19 types of woodworking machines. The existence of special-purpose machines, for which such…

Specifies requirements (static conformance requirements, dynamic conformance requirements and, in annex A, a list of ISPICS requirements) independent of the type of subnetwork and applicable to interworking units operating, in the open systems interconnection (OSI) local area network environment, the MAC service regardless of the types of subnetworks to which they are attached.

Specifies requirements (static conformance requirements, dynamic conformance requirements and, in annex A, a list of ISPICS requirements) dependent on the type of subnetwork and applicable to an interworking unit which is attached in the open systems interconnection (OSI) local area network environment to an ISO/IEC 8802-3 CSMA-CD LAN subnetwork and relaying to another subnetwork not necessarily…

Defines profile RD51.51, gives static conformance requirements, dynamic conformance requirements and, in annex A, a list of ISPICS requirements. Is applicable to interworking units concerned with operating in the open systems interconnection (OSI) local area network environment between CSMA/CD LAN subnetworks.

This work book is intended to be a business tool for small and medium sized enterprises. It is designed to introduce the user to an environmental management system (EMS) that is aligned with the five key principles and elements of the International Organization for Standardization (ISO) guidance standard, ISO 14004. It is interactive and patterned such that an EMS based on international standards…

This National Standard of Canada is based on International Standard ISO 4252:1992. 1 Scope This International Standard specifies design dimensions of a tractor for agriculture concerning a) minimum dimensions of access doorways; b) number, location and minimum dimensions of emergency exits; c) minimum internal clearance dimensions. It applies to tractors for agriculture having…

This National Standard of Canada is based on International Standard ISO 6814-1983. 1 Scope This International Standard establishes a vocabulary allowing identification of mobile or self-propelled specially-designed forestry machines and special forestry equipment and implements attached to prime movers.

This National Standard of Canada is equivalent to International Standard ISO 2551:1981. 1 Scope and field of application This International Standard specifies a procedure for the determination of the dimensional changes that take place when machine-made textile floor coverings are subjected to varied water and heat conditions. The method is applicable to all machine-made textile floor…

1. Scope 1.1 This standard applies to high-flash type aviation turbine fuel consisting entirely of hydrocarbon compounds, unless otherwise specified. 1.2 This standard describes a military grade fuel normally used in naval operations whose product quality parameters are influenced by international Military Standardization Agreements. 1.3 The testing and evaluation of a product against…

1. Scope 1.1 This standard applies to three grades of aviation gasoline consisting entirely of hydrocarbons except as otherwise specified herein. 1.2 This standard describes a product intended for use in internal combustion aircraft engines with spark ignition. 1.3 Operators should refer to their aircraft manual for the appropriate grade. 1.4…