Rechercher

ISO/IEC 10373-5:2014 defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross‑referenced to one or more base standards, which can be ISO/IEC 7810 or one or more of the supplementary standards that define the information storage technologies employed in identification cards applications. NOTE 1 Criteria for…

1 Scope 1.1 This standard applies to quick-connect terminals, both connectors and tabs, having nominal widths of 2.8, 3.2, 4.8, 5.2, and 6.3 mm (0.110, 0.125, 0.187, 0.205, and 0.250 in). They are intended for internal wiring connections in electrical equipment and for the field termination of conductors to electrical equipment in accordance with Part I of the Canadian Electrical Code, C22.1…

Canadian deviations International Standard IEC 60384-14:2013 (fourth edition) forms the basis for CAN/CSA-E60384-14, which contains the following deviations in addition to those shown in CAN/CSA-E60384-1:14. [Replace all references to “IEC 60384-1” with “CAN/CSA-E60384-1”] 1 General 1.1 Scope [Add the following] This Standard covers the above-noted products that are intended to be…

1 Scope 1.1 This Standard applies to portable type gas water heaters (herein after referred to as appliance or water heater) for use with propane, butane, or liquefied petroleum gases and mixtures thereof having: a) a regulated pressure; b) a non-regulated pressure. 1.2 Portable type water heaters and components employing materials or having forms of construction differing from those…

1 Scope This International Standard gives requirements for the Performance and safety of stand-alone gas mixers intended for medical use and intended for connection to a medical gas supply System. Rationales for some of the requirements are given in annex B. This International Standard does not apply to a) blocks of flowmeters with separate controls for the flow of each gas; b) gas mixers…

1 SCOPE 1.1 This Standard provides minimum requirements for nonmetallic internal retrofit systems intended for field installation in underground tanks for the storage of flammable and combustible liquids, such as: A Petroleum products, including petroleum hydrocarbon fuels with low bio-blends per specifications and similar flammable or combustible liquid petroleum derivatives, such as fuel…

1 SCOPE 1.1 This Standard provides minimum requirements for primary containment leak detection that uses qualitative characteristics to detect leaks in the primary containment. NOTE: Depending on the design of the tank system, and the capabilities of the leak detection devices, leaks from the tank alone, and/or from other parts of the tank system, may be detected. 1.2 Nonvolumetric leak…

1 Scope 1.1 This Standard applies to newly produced direct gas-fired crop dryers of the recirculating or non recirculating type hereinafter referred to as “dryers”, whose primary purpose is to provide process heating to dry farm crops. These dryers are used in non-occupied spaces and are constructed of non- combustible materials having input ratings of 12,500,000 Btu/hr (3 663 389 W) or less,…

1 Scope This International Standard specifies the requirements for establishing, implementing, maintaining and continually improving an information security management system within the context of the organization. This International Standard also includes requirements for the assessment and treatment of information security risks tailored to the needs of the organization. The requirements…

1 Scope This International Standard provides requirements for size designation and labelling of tracheobronchial tubes, including colour coding of the bronchial cuff and its associated pilot balloon. Tracheobronchial tubes that include bronchus blockers are excluded from the scope of this International Standard.