Rechercher

IEC 60695-1-12:2015 is intended as a general guideline for IEC Product Committees and provides: - an explanation of the principles and uses of fire safety engineering; - guidance on the use of fire safety engineering in the design of electrotechnical products; - fire safety engineering terminology and concepts; - an indication of properties, data and tests needed for input into fire safety…

IEC 62841-2-9:2015 applies to hand-held tappers and threaders. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all…

IEC 62320-1:2015 specifies the minimum operational and performance requirements, methods of testing and required test results for AIS Base Stations, compatible with the performance standards adopted by IMO Resolution MSC.74 (69), Annex 3, Universal AIS. It incorporates the technical characteristics of non-shipborne, fixed station AIS equipment, included in recommendation ITU-R M.1371 and IALA…

In the cooling and heating loads of a building, the air taken in from outside account for a large portion of the entire load; in order to estimate this load, it is necessary to correctly grasp the air flow rate of ventilation and air-conditioning systems. This International Standard stipulates the methods for measuring the rate of air flow through the ducts in a steadily operating ventilation and…

ISO 14884:2015 specifies technical requirements for weathertight hinged, sliding, and pantograph doors for manual and powered operation providing access to accommodation and service areas on large yachts, taking into account the location of the appliance. This International Standard only considers design loads applied to the door and transmitted into the frame and the adjacent structure. Loads…

IEC 60079-10-2:2015 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 60079-10-2:2015 is concerned with the identification and classification of areas where explosive dust…

ISO 17599:2015 specifies the requirements for the classification, composition, modelling, review, application, and management of digital mock-up. This International Standard for mechanical products is applicable to the building, management, review, and application of digital mock-up.

ISO 16872:2014 specifies the requirements for fine-tolerance hoist chains of grade VH for use as load chains in hand operated chain hoists for lifting purposes. They are round steel short link chains, electrically welded, heat treated, and tested; they comply with the general conditions of acceptance of ISO 1834. NOTE 1 The letter "V" expresses the grade in accordance with ISO…

ISO 16877:2014 specifies the requirements for fine-tolerance hoist chains of grade TH for use as load chains in hand operated chain hoists for lifting purposes. They are round steel short link chains, electrically welded, heat treated, and tested; they comply with the general conditions of acceptance of ISO 1834. NOTE 1 The letter "T" expresses the grade in accordance with ISO…

ISO/IEC 27040:2015 provides detailed technical guidance on how organizations can define an appropriate level of risk mitigation by employing a well-proven and consistent approach to the planning, design, documentation, and implementation of data storage security. Storage security applies to the protection (security) of information where it is stored and to the security of the information being…