Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance
ISO 19449:2015 specifies methods for the direct measurement of the concentration of gaseous exhaust emissions from mopeds as defined in ISO 3833 during inspection or maintenance. The results measured by this International Standard show the concentration of gaseous exhaust emissions in the no-load engine operating condition. It is applicable to mopeds having spark ignition engines (four-stroke…
Rough-terrain trucks — Safety requirements and verification — Part 5: Interface between rough-terrai...
ISO 10896-5:2015 defines design and safety requirements, and means for their verification, for the interface between a non-slewing or slewing variable-reach rough-terrain truck (hereafter referred to as "trucks") and an integrated personnel work platform (hereafter referred to as "integrated PWP").
ISO 10896-5:2015 does not address the design or safety requirements related to…
Radiological protection — Monitoring and internal dosimetry for specific materials — Part 1: Inhalat...
ISO 16638-1:2015 specifies the minimum requirements for the design of professional programmes to monitor workers exposed to uranium compounds. It establishes principles for the development of compatible goals and requirements for monitoring programmes and dose assessment for workers occupationally exposed to internal contamination. It establishes procedures and assumptions for risk analysis,…
Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immun...
IEC 61000-4-16:2015 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
IEC 61000-4-16:2015 relates to the immunity requirements and test methods for electrical and electronic equipment to…
Glass in building — Pendulum impact testing and classification of safety glass
The purpose of ISO 29584:2015 is to evaluate, by means of soft body impactors, safe breakage characteristics of glazing products intended to reduce cutting and piercing injuries to persons through accidental impact.
ISO 29584:2015 examines test methods currently employed to determine the pendulum impact performance of safety glass. Use of the methodologies in this International Standard improves…
Guidance for gamma spectrometry measurement of radioactive waste
ISO 19017:2015 is applicable to gamma radiation measurements on radioactive waste.
Radioactive waste can be found in different forms and exhibit a wide range of characteristics, including the following:
- raw or unconditioned waste, including process waste (filters, resins, control rods, scrap, etc.) and waste from dismantling or decommissioning;
- conditioned waste in various forms and…
Milk and milk products — Starter cultures, probiotics and fermented products — Quantification of lac...
ISO 19344:2015 specifies a standardized method for the quantification of active and/or total lactic acid bacteria and probiotic strains in starter cultures used in dairy products by means of flow cytometry. The method is also applicable to probiotics used in dairy products and to fermented milk products such as yogurts containing primarily lactic acid bacteria.
This International Standard does…
Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General require...
ISO 14520-1:2015 specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of gaseous fire fighting systems in buildings, plants or other structures, and the characteristics of the various extinguishants and types of fire for which they are a suitable extinguishing medium.
It covers total flooding systems primarily related to buildings, plants…
Rolling bearings and spherical plain bearings — Search structure for electronic media — Characterist...
ISO 21107:2015 establishes a search structure and properties vocabulary for identifying rolling bearings, bearing housings, accessories and spherical plain bearings primarily with the aid of electronic media, such as the Internet.
The methodology for using this International Standard in search programs is not included.
ISO 21107:2015 does not establish a search structure and an attribute…
Workplace air — Determination of mercury and inorganic mercury compounds — Method by cold-vapour ato...
ISO 17733:2015 specifies a procedure for determination of the time-weighted average mass concentration of mercury vapour and inorganic mercury compounds in workplace air. Mercury vapour is collected on a solid sorbent using either a diffusive badge or a pumped sorbent tube. Particulate inorganic mercury compounds, if present, are collected on a quartz fibre filter. Samples are analysed using…
