Rechercher

ISO 13687:2014 establishes minimum requirements for commercial and non-commercial harbours for leisure boats and yachts to deliver services to the boating community, excluding the standardization of sports activities. The scope does not cover specifics of boat yards, dry stacks, dry-docking areas, dry storages, fuel stations, and nearby beaches. Compliance with ISO 13687:2014 does not guarantee…

This part of ISO 10079 specifies safety and performance requirements for manually powered suction equipment intended for oro-pharyngeal suction. It applies to equipment operated by foot or by hand or both. Annex D illustrates the three parts of ISO 10079 by providing a schematic for typical systems. The commonest use of manually powered suction is in situations outside of health care settings…

This part of ISO 10079 specifies safety and performance requirements for manually powered suction equipment intended for oro-pharyngeal suction. It applies to equipment operated by foot or by hand or both. Annex D illustrates the three parts of ISO 10079 by providing a schematic for typical systems. The commonest use of manually powered suction is in situations outside of health care settings…

1. SCOPE 1.1 This standard applies to two grades of kerosene-type aviation turbine fuel (grades JET A and JET A-1), consisting of conventional hydrocarbons, synthetic hydrocarbons, naturally occurring non-hydrocarbons and additives as specified herein. Kerosene-type aviation turbine fuels are distillates with a minimum flash point of 38°C. 1.1.1 The two grades differ only in freezing point.…

1. SCOPE 1.1 This standard applies to two grades of kerosene-type aviation turbine fuel (grades JET A and JET A-1), consisting entirely of petroleum-derived hydrocarbons, naturally occurring non-hydrocarbons and additives as specified herein. Kerosene-type aviation turbine fuels are distillates having a minimum flash point of 38°C. 1.1.1 The two grades differ only in freezing point. Grade JET A…

This National Standard of Canada is equivalent to International Standard ISO 19901-1:2005. 1 Scope This part of ISO 19901 gives general requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures of all types used in the petroleum and natural gas industries. The requirements are divided…

1. SCOPE 1.1 This standard applies to two grades of kerosene-type aviation turbine fuel (grades JET A and JET A-1), consisting entirely of petroleum-derived hydrocarbons, naturally occurring non-hydrocarbons and additives as specified herein. Kerosene-type aviation turbine fuels are distillates having a minimum flash point of 38°C. 1.1.1 The two grades differ only in freezing point. Grade JET A…

1. SCOPE 1.1 This standard applies to three grades of kerosene-type aviation turbine fuel, consisting entirely of petroleum-derived hydrocarbons, naturally occurring non-hydrocarbons and additives as specified herein. Kerosene-type aviation turbine fuels are distillates having a minimum flash point of 38°C. Grade JET A has a maximum freezing point of -40°C, and Grade JET A-1 and Grade F-34 have…

Applies to equipment installed in partially weather-protected locations in a climate belonging to the group of 'moderate' climates covered by IEC 60721-2-1. Contains preferred test conditions as referred to in 8.4 of IEC 60605-1. The test cycle provided here is not intended to replace tests for other purposes, such as qualification, functional performance, environmental tests and tests…

ISO 19901-1:2015 gives general requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures of all types used in the petroleum and natural gas industries. The requirements are divided into two broad types: - those that relate to the determination of environmental conditions in general,…