Rechercher

Specifies the requirements for standard interfaces using a two-wire connection employing ISO/IEC 8482 signalling for use between the control and indicating equipment of an alarm system and one or more alarm system transceivers connected to alarm transmission systems.

Specifies the requirements for standard interfaces employing ITU-T V.24/V.28 signalling for communications between the control and indicating equipment of an alarm system and transmission equipment used for remote communications, where the transmission equipment is general purpose equipment. Is intended to be used as interfacing to standard modems, packet switching networks, X.25 PADs, etc.

Specifies the requirements for standard interfaces between the control and indicating equipment (CIE) of an alarm system and an alarm system transceiver where the alarm system transceiver is intended to plug into a standard space inside the CIE of the alarm system.

Specifies the requirements for standard interfaces between the terminal transceiver of an alarm transmission system and the annunciation equipment. Employs signalling in accordance with ITU-T Recommendation V.24/V.28.

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 15124-1:1998. 1 Scope This part of ISO/IEC ISP 15124 specifies an interchange format suitable for transfer of structured documents between equipment designed for raster processing. The documents supported by ISO/IEC ISP 15124 are based on a paradigm of an electronic engineering drawing or illustration.…

This National Standard of Canada is equivalent to International Standard ISO/IEC 10175-1:1996 (first edition, 1996-09-01), including Technical Corrigendum #1:2001, #2:2001, #3:2001 and #4:2001. 1 Scope ISO/IEC 10175 consists of three parts: Part 1: Abstract service definitions and procedures Part 2: Protocol specification Part 3: Management abstract service definition and…

This National Standard of Canada is equivalent to International Standard ISO 9241-3:1992. 1 Scope This part of ISO 9241 establishes image quality requirements for the design and evaluation of single- and multi-colour VDTs. The requirements are stated as performance specifications, and the evaluations provide test methods and conformance measurements. It should be noted that, at…

This International Standard specifies the procedures, formats and facilities at the Packet Layer for Data Terminal Equipment (DTE) operating in conformance with ITU-T Recommendation X.25. Both Virtual Call and Permanent Virtual Circuit modes of operation are covered. The Packet Layer protocol specified herein can be used in both Open Systems Interconnection (OSI) and non-OSI environments. When…

This International Standard specifies the procedures, formats and facilities at the Packet Layer for Data Terminal Equipment (DTE) operating in conformance with ITU-T Recommendation X.25. Both Virtual Call and Permanent Virtual Circuit modes of operation are covered. The Packet Layer protocol specified herein can be used in both Open Systems Interconnection (OSI) and non-OSI environments. When…

1. Domaine d'application 1.1 Cette norme décrit les éléments et méthodes essentiels pour la manipulation, le transport et la décontamination biologique sécuritaires des dispositifs médicaux réutilisables contaminés (voir la figure 1). Note : Le traitement de décontamination biologique comprend un nettoyage à fond et, si la sécurité du personnel ou des bénéficiaires l'exige, un…