Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives
ISO 13007-1:2014 applies to ceramic tile adhesives for internal and external tile installations on walls and floors.
ISO 13007-1:2014 gives the terminology, concerning the products, working methods, application properties, etc., for ceramic tile adhesives
ISO 13007-1:2014 specifies the values of performance requirements for all ceramic tile adhesives [cementitious (C), dispersion (D) and reaction…
Information technology - Dynamic adaptive streaming over HTTP (DASH) - Part 1: Media presentation de...
ISO/IEC 23009-1:2014 primarily specifies formats for the Media Presentation Description and Segments for dynamic adaptive streaming delivery of MPEG media over HTTP. It is applicable to streaming services over the Internet.
Medical electrical equipment -- Part 2-69: Particular requirements for basic safety and essential pe...
ISO 80601-2-69:2014 specifies requirements for the basic safety and essential performance of an oxygen concentrator in combination with its accessories, hereafter referred to as ME equipment, intended to increase the oxygen concentration of gas intended to be delivered to a single patient. Such oxygen concentrators are typically intended for use in the home healthcare environment, including…
Nanotechnologies — Determination of silver nanoparticles potency by release of muramic acid from Sta...
ISO/TS 16550:2014 provides a test method for evaluating potency of silver nanoparticles to cell wall degradation of Staphylococcus aureus and muramic acid release as quantified by a gas chromatography-mass spectrometry (GC-MS).
Fibre-reinforced plastic composites — Determination of the mode II fracture resistance for unidirect...
ISO 15114:2014 specifies a method for the determination of mode II shear load delamination resistance. GIIC, (critical energy release rate), of unidirectional fibre-reinforced plastic composites using the calibrated end-loaded split (C-ELS) test.
It is applicable to carbon-fibre and glass-fibre reinforced thermosets and thermoplastics.
The scope is not necessarily limited to these fibres and lay-…
Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/...
ISO 9276-2:2014 provides relevant equations and coherent nomenclatures for the calculation of moments, mean particle sizes and standard deviations from a given particle size distribution. Two notation systems in common use are described. One is the method of moments while the second describes the moment-ratio method. The size distribution may be available as a histogram or as an analytical…
Plastics — Blow-moulded polypropylene containers for packaging of liquid foodstuffs
ISO 13106:2014 provides the requirements for polypropylene resins intended for use in blow-moulded, round containers with capacities up to, and including two litres intended for the packaging of liquids for human consumption. ISO 13106:2014 also provides tolerances on mass, dimensions, methods of sampling, testing, and performance requirements.
ISO 13322-1:2014 is applicable to the analysis of images for the purpose of determining particle size distributions where the velocity of the particles against the axis of the optical system of the imaging device is zero. The particles are appropriately dispersed and fixed in the object plane of the instrument. The field of view may sample the object plane dynamically either by moving the sample…
Packaging for terminally sterilized medical devices — Guidance on the application of ISO 11607-1 and...
ISO/TS 16775:2014 provides guidance for the application of the requirements contained in ISO 11607‑1 and ISO 11607‑2. It does not add to, or otherwise change, the requirements of ISO 11607‑1 and/or ISO 11607‑2. It is an informative document, not normative, and does not include requirements to be used as basis of regulatory inspection or certification assessment activities.
The guidance can be…
