Rechercher

Domaine d'application 1.1 Généralités Cette norme prescrit les exigences de performances pour les modèles de thermostats dédiés à la commutation d'une charge de chauffage résistive à la tension de secteur (120 à 240 V). Les modèles visés par cette norme sont les suivants : a) les thermostats à tension de secteur, de type mural, utilisés avec les plinthes chauffantes, les…

Scope 1.1 This Standard defines minimum energy efficiency and performance requirements for light emitting diode (LED) lamps with an ANSI or IEC standardized base that are designed to connect to a low-voltage or branch circuit via a lampholder. The criteria in this Standard apply to both integral LED lamps of nonstandard form, and to those intended to replace standard general service…

1.1.1 Cette norme énonce des recommandations sur l’entretien des appareillages et des systèmes électriques. 1.1.2 Cette norme s’applique aux appareillages électriques nouveaux et existants. Dans le cas des nouvelles installations d’appareillage électrique, cette norme peut être appliquée durant les étapes préliminaires de la conception pour permettre la mise en oeuvre de pratiques d’…

1 Domaine d’application 1.1 Cette norme vise les candidats plongeurs professionnels ainsi que les organismes, les instructeurs et les installations de formation. Elle décrit les exigences relatives à l’évaluation des candidats, aux qualifications des instructeurs et à l’équipement minimal pour chaque niveau de formation. Cette norme fournit également des lignes directrices sur l’audit des…

1.1 This Standard applies to indoor and outdoor meter-mounting devices, either as complete self-contained devices or provided as a part of service equipment, for use in nonhazardous locations, and intended to be employed in accordance with the Rules of the Canadian Electrical Code, Part I (“CEC Part I”). 1.2 This Standard covers devices for use with watt hour meters, demand meters, time…

1.1 These requirements cover liquid-tight flexible nonmetallic conduit in the 3/8 – 4 (12 – 103) trade sizes of Type LFNC-A (Layered), Type LFNC-B (Integral), and Type LFNC-C (Corrugated) constructions. The conduit is intended for installation in accordance with the National Electrical Code (NEC) and the Canadian Electrical Code (CEC), Part 1. The values in parentheses are metric trade…

1.1 This Standard applies to electric motors and generators for installation and use, in accordance with the Rules of the Canadian Electrical Code, Part I, in non-hazardous locations. Note: The term “machine” throughout this Standard should be assumed to mean “motor” and “generator”. 1.2 Clauses 2 to 7 are general in nature and apply, unless otherwise noted, to the motors and generators…

1.1 This Standard applies to electrically-powered door opening devices and other opening and closing appliances rated at 600 V or less and intended to be used in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard gives requirements for complete doors, gates, and other such assemblies that include electrically-powered opening and…

1.1 This Standard applies to single- and multiple-conductor fire alarm and signal cables with a maximum nominal voltage rating of 300 V and a minimum temperature rating of 60 °C for use in buildings and other structures in dry or damp locations in accordance with the Rules of Sections 16 and 32 of the Canadian Electrical Code, Part I. 1.2 Because other CSA Group Standards specify…

1 Scope 1.1 This Standard applies to concrete block masonry units made from cementitious materials, water, and aggregates, with or without the inclusion of other materials. This Standard may be applied to other units of similar manufacture and size within the limitations of the Standard. Note: For concrete brick masonry units, see CSA A165.2. For prefaced concrete masonry units, see CSA A165…