Rechercher

1.1 This Standard applies to factory-made automatic icemakers with a capacity not exceeding 1814 kg/24 h, measured at standard rating conditions. These machines produce cube, flake, crushed, nugget, or fragmented ice in batches or in a continuous process. They are electrically operated and are designed for a 60 Hz operating current with nominal nameplate voltage. 1.2 This Standard applies to…

1.1 This Standard specifies requirements for copper and aluminum conductor secondary and serviceentrance cables intended for use on systems having a nominal voltage of 600 V or less in underground installation a) by direct burial; or b) in duct systems. This Standard also applies to multiple-conductor cable assemblies. The products specified in this Standard are designed to be installed in…

The following deviations are intended to meet Canadian product requirements and to align with the Canadian Electrical Code, Part I. International Standard IEC 61010-2-101:2015 (second edition) forms the basis for CAN/CSA-C22.2 No. 61010-2-101, which contains the following deviations in addition to those shown in CAN/CSA-C22.2 No. 61010-1:12. Les exigences propres au Canada qui suivent…

The requirements of the IEC 60079 series of Standards cover protection with respect to explosion hazard only. The CAN/CSA-C22.2 No. 60079 series of Standards (based on the adoption of corresponding IEC Standards) is to be used in conjunction with other applicable Standards containing the appropriate electrical safety requirements for general use equipment. This Standard covers products that…

The requirements of the IEC 60079 series of Standards cover protection with respect to explosion hazard only. The CAN/CSA-C22.2 No. 60079 series of Standards (based on the adoption of corresponding IEC Standards) is to be used in conjunction with other applicable Standards containing the appropriate electrical safety requirements for general use equipment.

Replace the text in 1,1 by the following paragraph: This part of IEC 61010 is applicable to electrically operated laboratory equipment and its accessories for mechanical mixing and stirring, where mechanical energy influences the shape or size or homogeneity of materials and their accessories. Such devices may contain heating elements. NOTE If all or part of the equipment falls within the…

1.1 This Standard applies to newly produced gas appliance connectors constructed entirely of new, unused parts and materials that are intended for use with gas utilization equipment that may be mounted on casters or otherwise be subject to movement. 1.2 Connectors complying with this Standard are considered suitable for use with natural, manufactured, mixed and propane gases, and LP gas-air…

1.1 Types d’évaluation des conséquences Cette norme propose des méthodes pour la modélisation des conséquences des accidents mettant en cause des réacteurs nucléaires pour l’évaluation de la sûreté et les interventions en temps réel en cas d’urgence. Notes : 1) Les modèles utilisés pour évaluer les conséquences d’un accident postulé aux fins d’évaluation de la sûreté sont très semblables à…

1.1 Cette norme énonce les exigences relatives à la prévention des dommages aux infrastructures souterraines. Note : Des exemples d’infrastructures souterraines sont : a) pipelines de pétrole et de gaz ; b) câbles électriques et de télécommunications ; et c) conduites d’eau et d’égout. 1.2 Cette norme s’applique aux travaux d’excavation à proximité d’infrastructures souterraines existantes, hors…

1.1 Cette norme fournit les exigences et les pratiques exemplaires quant aux activités du Bureau du registre de la nation métisse. 1.2 Cette norme traite des activités objectivement vérifiables du Bureau du registre et ne définit pas les éléments de critères ou les critères d’évaluation utilisés par le Bureau du registre pour identifier et inscrire les citoyens ou membres. La définition…