Floating leisure articles for use on and in the water — Part 5: Additional specific safety requireme...
ISO 25649-5:2017 is applicable for CLASS C classified floating leisure articles for use on and in water according to ISO 25649‑1 regardless of whether the buoyancy is achieved by inflation or inherent buoyant material.
ISO 25649-5:2017 is to be applied with ISO 25649‑1 and ISO 25649‑2.
NOTE 1 Typical products forming class C (see Annex B):
- tube riders towable with interior holding…
Floating leisure articles for use on and in the water — Part 6: Additional specific safety requireme...
ISO 25649-6:2017 is applicable for Class D floating leisure articles for use on and in water according to ISO 25649‑1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
ISO 25649-6:2017 is to be applied with ISO 25649‑1 and ISO 25649‑2.
NOTE 1 Typical products forming Class D (see Annex A):
- inflatable climbing structures on the water;
- bouncing…
Floating leisure articles for use on and in the water — Part 7: Additional specific safety requireme...
ISO 25649-7:2017 is applicable for Class E floating leisure articles for use on and in water according to ISO 25649‑1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
ISO 25649-7:2017 is applicable with ISO 25649‑1 and ISO 25649‑2.
Class E devices are intended for use in bathing areas or in protected and safe shore zones.
NOTE 1 Typical products forming…
Fibre optic active components and devices - Package and interface standards - Part 1: General and gu...
IEC 62148-1:2017 aims to assure interchangeability in physical interfaces between fibre optic active components and devices supplied by different manufacturers, but it does not guarantee operation between such devices. This second edition cancels and replaces the first edition, published in 2002, and constitutes a technical revision. This edition includes the following significant technical…
Composants et dispositifs actifs fibroniques - Normes de boîtiers et d'interface - Partie 1: Gé...
IEC 62148-1:2017 vise à assurer l’interchangeabilité des interfaces physiques entre les composants et dispositifs actifs fibroniques fournis par différents fabricants, mais elle ne garantit pas le fonctionnement entre ces mêmes dispositifs. Cette deuxième édition annule et remplace la première édition parue en 2002 et constitue une révision technique. Cette édition inclut les modifications…
Explosive atmospheres - Part 46: Equipment assemblies
IEC TS 60079-46:2017 specifies requirements for the design, construction, assembly, testing, inspection, marking, documenting and assessment of equipment assemblies for use in explosive atmospheres under the responsibility of the manufacturer of the equipment assembly. The requirements of this document apply to individual items according to the IEC 60079 series or ISO 80079 series that comprise…
Atmosphères explosives - Partie 46: Assemblages d'appareils
IEC TS 60079-46:2017 spécifie les exigences relatives à la conception, à la construction, à l’assemblage, aux essais, aux inspections, au marquage, à la documentation et à l’évaluation des assemblages d’appareils destinés à être utilisés en atmosphères explosives, sous la responsabilité du fabricant de l’assemblage d’appareils.
Les exigences du présent document s’appliquent aux éléments…
Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner co...
IEC 60730-2-5:2013+A1:2017 applies to automatic electrical burner control systems for the automatic control of burners for oil, gas, coal or other combustibles for household and similar use including heating, air conditioning and similar use. This part 2-5 is applicable to a complete burner control system and to a separate programming unit. This part 2-5 is also applicable to a separate…
