Identification cards - Integrated circuit cards - Part 11: Personal verification through biometric m...
ISO/IEC 7816-11:2017 specifies security-related interindustry commands to be used for personal verification through biometric methods in integrated circuit cards. It also defines the data structure and data access methods for use of the card as a carrier of the biometric reference and/or as the device to perform the verification of the cardholder's biometric probe (on-card biometric…
1.1
This Standard applies to the following products intended for use in accordance with CSA C22.1, Canadian Electrical Code, Part I:
a)
metal and nonmetallic junction boxes (of other than the swimming pool type); and
b)
pull boxes where the length does not exceed three times the width and the volume exceeds 1640 mL.
1.2
This Standard does not apply to
a)
junction and pull boxes that are…
Inspection périodique des systèmes et des composants complémentaires des centrales nucléaires CANDU
1.1
Cette norme énonce des exigences relatives à l’inspection périodique des systèmes sous pression, des composants et des supports qui font partie d’une centrale nucléaire CANDU à l’aide d’une méthodologie d’inspection en service tenant compte du risque (RI-ISI : risk informed in-service inspection). L’inspection périodique (se reporter à l’annexe A pour des instructions supplémentaires) s’…
1.1 General
This Standard applies to the design, characteristics, construction, installation, dismantling, operation, inspection, testing, and maintenance of tower cranes.
This Standard applies to tower cranes powered by electric motors or internal combustion engines and any variations thereof that retain the same fundamental characteristics. The scope includes cranes of these types that adjust…
Household and similar electrical appliances — Safety — Part 2-80: Particular requirements for fans
This clause of Part 1 is replaced by the following.
This International Standard deals with the safety of electric fans for household and similar
purposes, their rated voltage being not more than 250 V for single-phase appliances and
480 V for other appliances.
NOTE 101 Examples of fans that are within the scope of this standard are
– ceiling fans;
– duct fans;
– partition fans;
– pedestal…
Explosive atmospheres — Part 30-2: Electrical resistance trace heating — Application guide for desig...
This part of IEC 60079 provides guidance for the application of electrical resistance trace
heating systems in areas where explosive atmospheres may be present, with the exclusion of
those classified as requiring EPL Ga/Da (traditional relationship to Zone 0 and Zone 20
respectively). This standard also provides guidance for explosive atmospheres incorporating
the Division method of area…
Réseaux de distribution de gaz médicaux — Partie 1 : Canalisations pour les gaz médicaux, l’aspirati...
1.1
Cette norme stipule des exigences visant les canalisations pour les gaz médicaux, l’aspiration médicale,
les gaz de soutien médical et les systèmes d’évacuation des gaz d’anesthésie dans des établissements
de santé publics et privés. Elle s’applique à tous les établissements qui offrent des services de soins,
quels que soient le type, la taille, l’emplacement ou la gamme des services…
Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medica...
This part of ISO 17665 provides guidance about the attributes of a medical device to be considered by
the user when assigning a medical device to a product family for the purpose of identifying and aligning
it to a processing category for a specific moist heat sterilization process.
NOTE While this part of ISO 17665 is applicable to health care facilities, it may be used by a manufacturer of
a…
Code d’installation du gaz naturel pour les véhicules
1 Domaine d’application
1.1
Ce code vise l’installation, l’inspection, la réparation et l’entretien du système de stockage et de distribution de carburant qui équipe les chariots de manutention à moteur et les véhicules destinés à être alimentés au gaz naturel comprimé (GNC). Les systèmes d’alimentation en gaz naturel des véhicules automoteurs utilisant le gaz pour la propulsion sont visés par…
