Rechercher

This document defines cork as a raw material for the industry, as well as the terms to be used in describing the different forms in which cork can be found. This document also indicates the terms and definitions concerning its main products, some of the operations to which cork can be submitted and anomalies that can be associated with it.

Le présent document définit le liège en tant que matière première pour l'industrie ainsi que les termes que l'on doit utiliser pour désigner les différentes formes sous lesquelles le liège peut se présenter. Le présent document indique aussi les termes et les définitions concernant les principaux produits, quelques unes des opérations que le liège peut subir et les anomalies…

This document specifies a method for the quantitative determination of trans and total (cis + trans) vitamin K1 in infant, pediatric and adult nutritionals using normal phase (NP) high-performance liquid chromatography (HPLC) with post-column reduction and fluorescence detection. The method demonstrated good linearity over a standard range of ~2 μg/l to 80 μg/l trans vitamin K1, and the limit of…

1 Scope This National Standard of Canada defines equipment requirements, performance criteria, and operating and testing procedures for the implementation of a vapour control system (VCS) in gasoline distribution networks including terminals, bulk plants, service stations and cargo tanks, commonly known as Stage I (see Figure 1 for a schematic representation). This standard does not include…

1 Objet La présente Norme nationale du Canada définit les exigences relatives à l’équipement, aux critères de rendement, à la procédure à suivre et aux méthodes d’essai pour la mise en place de systèmes de récupération des vapeurs (SRV) dans les réseaux de distribution d’essence comprenant des terminaux, des dépôts routiers, des stationsservice et des camions-citernes qui sont couramment…

1 Scope 1.1 Objective 1.1.1 This Standard provides minimum requirements and recommendations to protect persons who work in an environment affected by welding, cutting, and allied processes from illness and injury and to prevent damage to property arising from the installation, operation, and maintenance of equipment used in these processes. 1.1.2 This Standard specifies the elements of a…

1 Scope This International Standard specifies the loading and strength requirements of overhead lines derived from reliability-based design principles. These requirements apply to lines 45 kV and above, but can also be applied to lines with a lower nominal voltage. This document also provides a framework for the preparation of national standards dealing with overhead transmission lines,…

This document specifies a method for the determination of free and released formaldehyde in leathers. This method, based on high performance liquid chromatography (HPLC), is selective and not sensitive to coloured extracts and is intended to be used for precise quantification of formaldehyde. The formaldehyde content is taken to be the quantity of free-formaldehyde and formaldehyde extracted…

Le présent document spécifie une méthode permettant de doser le formaldéhyde libre et le formaldéhyde dégagé dans les cuirs. Cette méthode, fondée sur la chromatographie en phase liquide à haute performance (CLHP), est sélective et insensible aux extraits colorés; elle est destinée à obtenir une quantification précise du formaldéhyde. La teneur en formaldéhyde est définie comme étant la quantité…

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the text with the following: This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of their publications for products…