Rechercher

1 Scope This document provides an extension of OOXML for embedding CREPDL scripts within an OOXML document, and validating character contents in the OOXML document against these CREPDL scripts.

1 Scope This document provides guidance to the members of governing bodies of organizations and their executive managers on the implications of ISO/IEC 38505-1 for data management. It assumes understanding of the principles of ISO/IEC 38500 and familiarization with the data accountability map and associated matrix of considerations, as presented in ISO/IEC 38505-1. This document enables an…

1 Scope 1.1 This Standard applies to wiring devices rated 60 A or less and intended for use in accordance with CSA C22.1, Canadian Electrical Code, Part I, as follows: a) Class 2 power supply outlets (USB) installed on i) faceplates of an outlet box; ii) a yoke similar to an outlet box mounted receptacle; or iii) mounted on a wall as a self-contained device; and b) combination…

1 Domaine d’application 1.1 Cette norme énonce les procédures d’essai et les exigences de rendement minimales pour les lampes standards intégrées et les lampes directionnelles de petit diamètre. 1.2 Cette norme énonce les procédures d’essai et les exigences de rendement qui s’appliquent à toutes les lampes standards intégrées, de même que certaines procédures d’essai et certaines exigences de…

1 Scope This International Standard applies to industrial, scientific and medical electrical equipment operating in the frequency range 0 Hz to 400 GHz and to domestic and similar appliances designed to generate and/or use locally radio-frequency energy. This standard covers emission requirements related to radio-frequency (RF) disturbances in the frequency range of 9 kHz to 400 GHz.…

1 Scope 1.1 This Standard applies to line pressure regulators (see Clause 3, Definitions), constructed entirely of new, unused parts and materials, hereinafter referred to as regulator(s), either individual or in combination with overpressure protection devices, hereinafter referred to as device(s), intended for application in gas piping systems between the service regulator, or LP-gas 2 psi (…

1 Scope and normative references 1.1 Scope [Add the following paragraph] This Standard applies to the safety of such equipment designed and constructed for installation and use in accordance with CSA C22.1, Canadian Electrical Code, Part I. 1.2 Normative references [Add the following to the Part 1] Any reference to International Standards that are adopted as National Standards of Canada…

1 Domaine d’application 1.1 Objectif 1.1.1 Cette norme énonce les exigences et recommandations minimales destinées à protéger les personnes qui travaillent dans un milieu concerné par le soudage, le coupage et les procédés connexes contre toute maladie et blessure et à prévenir tout dommage aux biens au cours de l’installation, de l’utilisation et de l’entretien des appareils utilisés avec…

1.1 Scope This Standard specifically addresses the planning, design, operation, and maintenance of intermittent/ seasonal discharge lagoon and wetland systems that are most appropriate for use in Northern regions, where effluent discharge is either difficult or not possible in colder months.

1 Scope 1.1 This Standard describes the requirements, including quality system requirements, for the O&M of an HCF. It sets out specific requirements for a) buildings and architectural systems; b) site elements related to the building and its functions, including on-site access routes; c) on-site utilities; d) the building's mechanical, electrical, and information technology, and…