Fire resistance tests — Door and shutter assemblies — Part 1: General requirements
This document, used in conjunction with ISO 834-1, specifies a method for determining the fire resistance of door and shutter assemblies designed primarily for installation within openings incorporated in vertical separating elements, such as
— hinged and pivoted doors,
— horizontally sliding and vertically sliding doors, including articulated sliding doors and sectional doors,
— steel single-…
Soudage — Étalonnage, vérification et validation du matériel utilisé pour le soudage, y compris pour...
ISO 17662:2016 spécifie les exigences relatives à l'étalonnage, la vérification et la validation du matériel utilisé pour:
- la maîtrise des variables du processus en cours de production; et
- la maîtrise des caractéristiques du matériel utilisé pour le soudage ou les activités connexes;
quand l'élément résultant ne peut pas être ultérieurement vérifié dans des conditions…
ISO 5821:2009 specifies the dimensions and tolerances of resistance spot welding electrode caps, where a female taper is used to fix the cap to an electrode adaptor.
ISO 5821:2009 applies only to electrode caps for which the electrode force given for diameters 13 mm, 16mm and 20 mm (taper 1:10) and for diameters 12,7 mm, 15,8 mm and 19,1 mm (taper 1:9,6) is not exceeded.
Solar energy — Calibration of a pyranometer using a pyrheliometer
Its use is mandatory for the calibration of secondary standard pyranometers according to ISO 9060, and is recommended for the calibration of pyranometers which are used as reference instruments in comparisons. Is intended for use by test institutions or test laboratories equipped with well-maintained pyrheliometers and is applicable to all pyranometers. The object is to promote the uniform…
Radiological protection — Procedures for monitoring the dose to the lens of the eye, the skin and th...
ISO 15382:2015 provides procedures for monitoring the dose to the skin, the extremities, and the lens of the eye. It gives guidance on how to decide if such dosemeters are needed and to ensure that individual monitoring is appropriate to the nature of the exposure, taking practical considerations into account. National regulations, if they exist, provide requirements that need to be followed.
ISO…
Air comprimé — Mesurage des polluants — Partie 5: Teneur en vapeurs d'huile
L'ISO 8573-5:2001 spécifie la méthode d'essai par chromatographie en phase gazeuse pour la détermination de la teneur en vapeurs d'huile (hydrocarbures composés de six atomes de carbone ou plus) dans l'air comprimé, indépendamment de l'origine de l'air comprimé, tout comme de la présence de tout solvant organique dans la vapeur, difficile à séparer des autres…
