Specifies characteristics of the double-pole connector for special warning lights and for hand lamps. Two figures illustrate shapes and details of the plug and the socket; details not specified are left to the manufacturer's choice. Dimensions and tolerances are given in millimetres.
Asbestos-cement pipelines — Field pressure testing
Applies to the field pressure testing of asbestos-cement pipelines, above and below ground, covering fluids, with or without internal hydraulic pressure and consisting of pipes referred to in ISO 160 and ISO 181. Outlines the basic methods of pressure testing these types of asbestos-cement pipelines.
Unplasticized polyvinyl chloride (PVC) pipes and fittings — Determination and specification of densi...
The density of an unplasticised polyvinylchloride (PVC-U) pipe or -fitting, measured by the method described in ISO 1183, shall be between the limits of 1,35 gram per cubic centrimetre and 1,46 gram per cubic centrimetre. This does not apply to pipes made of compounds containing fillers or cellular products.
Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch di...
Specifies the characteristics of products with metric dimensions and thread diameters from 3 mm up to and including 20 mm; includes specifications with reference to International Standards; gives an example for the designation.
The Standard specifies the following characteristics of the oil. Appearance: Clear, slightly viscous liquid. Colour: Almost colourless to yellow. Odour: Characteristic, sweet, woody, persistent. Relative density at 20/20 °C: 0,968 - 0,983. Refractive index at 20 °C: 1,5030 - 1,5080. Optical rotation at 20 C: Range from - 21 to - 15 . Miscibility with 70 % (V/V) ethanol at 20 °C: 1 : 5. Ester…
Methyl chloride and ethyl chloride for industrial use — Methods of test
Specifies procedures for determining the acidity , the residue on evaporation and the water content by the Karl Fischer method. The acidity test is applicable to products having acidities, expressed as hydrochloric acid, between 1 and 50 mg/kg. For determination of ressidue on evaporation the method specified in ISO 2210 is recommended which is applicable to products leaving a residue on…
Fluorinated hydrocarbons for industrial use — Determination of non-volatile residue
Specifies a method, the principle of which is based on evaporation of a test portion under specified conditions, using special apparatus, and weighing of the residue after evaporation. Details the procedure and provides information on the expression of results and the data to be included in the test report.
Inorganic chemical products for industrial use — General method for determination of chloride conten...
Covers a method enabling quantities of chloride eceeding 1 mg in the test portion to be determined with an absolute error of 0,2 to 0,5 mg, according to the concentration of the standard volumetric solution used. The principle of determination is based on the conversion of chloride ions into weakly ionized mercury(II) chloride, using highly ionized standard volumetric mercury(II) nitrate solution…
