Rechercher

Specifies the tests and procedures to be followed in order to verify that a crane conforms to its operational specifications and is capable of lifting rated loads. Where rated loads are determined by stability, a test procedure and test load are specified that permit stability margins to be easily verified. Defines test procedures such as conformity tests, visual inspection and load lifting…

Specifies three methods for determination - method A: on a straightened fibre on a graduated rule, under a light tension applied with the aid of forceps and grease; - method B: measurement, using an opisometer, of the length of the image of fibre enlarged by projection on a screen; - method C: by use of a semi-mechanical device. - Intended to replace two existing International Standard, ISO 270…

The method is applicable to products having a silicon content greater than 0,5 % (m/m) and a fluorine content not more than 0,1 % (m/m). Should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, procedure and expression of results.

Specifies a method using a disc-shped test piece to be prepared by moulding a test portion ina ring which is fitted into a heated bath. A steel ball is placed on the upper surface of the test piece. Then the temperature (softening temperature) is determined at which the test piece, on heating at a prescribed rate, softens sufficiently to sag to a specifeid depth under the mass of the ball.…

The method is intended to be carried out simultaneously with the determination of other constituents of the same analytical sample so that the contents of the other constituents can be calculated on the basis of the absolutely dry ore. ISO 6129 should be read in conjunction with ISO 6629.