Multimedia systems and equipment - Colour measurement and management - Part 13: Measurement method o...
IEC TS 61966-13:2023 defines an objective colour difference metric and a measurement method for observer metamerism caused by displays with different spectral power distributions. This document also specifies the measuring equipment, conditions and methods that are necessary to obtain the metric. This document applies to light-emitting or backlit transmitting colour displays measured under dark-…
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety ...
1 Scope
This clause of Part 1 is applicable, except as follows.
Addition:
This document applies to grass shears with a maximum cutting width of 200 mm designed primarily for
cutting grass.
This document does not apply to hedge trimmers.
NOTE 101 Hedge trimmers are covered by IEC 62841-4-2.
Textile test methods Flame resistance of soft floor coverings
1 Scope
This National Standard of Canada:
• determines the flame resistance of soft floor coverings when exposed to an ignition source (methenamine for
timed burning tablet) under specified conditions;
• establishes sampling plans and procedures to determine the acceptability with respect to the flame resistance
of soft floor coverings using a sequential sampling procedure;
• describes a…
Méthodes pour épreuves textiles Résistance à l’inflammation des revêtements de sol mous
1 Objet
La présente Norme nationale du Canada :
• permet de déterminer la résistance à l’inflammation des revêtements de sol mous lorsqu’ils sont exposés à une
source d’allumage (tablette de méthénamine à durée de combustion déterminée) dans des conditions précises;
• établit des procédures et des plans d’échantillonnage pour déterminer l’acceptabilité en ce qui a trait à la
résistance à l’…
Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification and technical s...
This document specifies requirements for classification of metal and non-metal wires (solid and cored), rods, cords processed by means of thermal spraying, especially by arc and flame spraying.
Light and lighting – Commissioning of lighting systems in buildings – Explanation and justification ...
This document provides information to support the correct understanding, use and national implementations of ISO/TS 21274. It gives explanations on the procedures and background information. It also provides justifications of the choices that have been made. It gives detailed examples to illustrate the overall workings of ISO/TS 21274.
Fine ceramics (advanced ceramics, advanced technical ceramics) — Rockwell indentation test for evalu...
This document specifies a method for the qualitative evaluation of the adhesion of ceramic coatings up to 20 μm thick by indentation with a Rockwell diamond indenter. The formation of cracks after indentation can also reveal cohesive failure. The indentations are made with a Rockwell hardness test instrument.
The method described in this document can also be suitable for evaluating the adhesion…
Projection thermique — Fils, baguettes et cordons pour projection thermique à l'arc et au pisto...
Le présent document spécifie les exigences en matière de classification des fils métalliques et non métalliques (pleins et fourrés), des baguettes, des cordons traités par projection thermique, notamment les procédés à l’arc et dans la flamme.
Educational organizations — Requirements for bodies providing audit and certification of educational...
This document defines the rules applicable to the audit and certification of educational organization management systems (EOMS) conforming to the requirements given in ISO 21001 (or other sets of specified EOMS requirements). It also provides the necessary information and confidence to customers about the way certification of their suppliers has been granted.
Certification of EOMS is a third-…
