Rechercher

1.1 This Standard applies to Class 1, 2, 3, 4, 5, and 7 powered lift trucks—their design, operation, and maintenance. In addition, certain clauses apply to Class 6 vehicles, non-powered high-lift trucks, and personnel and burden carriers. See Annex B for a listing and description of classes. 1.2 The purpose of this Standard is to promote lift truck safety and minimize the risk of injury to…

This is the third edition of CAN/CSA-C22.2 No. 60601-2-11, Medical electrical equipment — Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60601-2-11 (third edition, 2013-01). It supersedes the previous…

This is the first edition of CAN/CSA-C22.2 No. 60601-2-66, Medical electrical equipment — Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60601-2-66 (first edition, 2012–10).…

This is the second edition of CAN/CSA-C22.2 No. 60601-2-24, Medical electrical equipment — Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60601-2-24 (second edition, 2012-10). It supersedes the…

1 Scope 1.1 This Standard applies to nonmetallic or composite mechanical protection tubing (MPT), and nonmetallic, composite or metallic fittings, and clamps used for the support, routing and mechanical protection of conductors, wires, and cables. The MPT, fittings, and clamps are intended to be used to interconnect separate component assemblies or consoles of electrical devices, such as…

The Code covers all electrical installations for buildings, structures, and premises and is intended to apply to all voltages. Although low voltages might not pose a shock hazard, various conditions can lead to physical injury and damage to equipment, even at seemingly harmless voltage levels. The Scope specifies the subjects that the Code covers. In addition, it lists subjects not covered so…

This Code covers all electrical work and electrical equipment operating or intended to operate at all voltages in electrical installations for buildings, structures, and premises, including factory-built relocatable and non-relocatable structures, and self-propelled marine vessels stationary for periods exceeding five months and connected to a shore supply of electricity continuously or from time…

1.1 Domaine d’application et objet 1.1.1 Cette norme s’applique aux tableaux de contrôle d’au plus 600 V destinés à être installés conformément au Code canadien de l’électricité (CCÉ), Première partie, au National Electrical Code (NEC), ANSI/NFPA 70, et à la Norme mexicaine sur les installations électriques (utilisation), NOM-001-SEDE. 1.1.2 Dans la présente norme, le terme «tableau de contrôle»…

1.1 This Standard specifies requirements and test procedures to determine the performance of stationary electric signs that are hard wired. Note: Background information on the scope and objective of this Standard is provided in Annex B. 1.2 This Standard applies to stationary electric signs for indoor or outdoor use, in nonhazardous locations, intended for installation in accordance with the…

1.1 This Standard specifies requirements and test procedures to determine the performance of portable plug-in luminous signs. Note: Background information on the scope and objective of this Standard is provided in Annex A. 1.2 This Standard applies to portable electric signs for indoor or outdoor use, in nonhazardous locations, intended for installation in accordance with the Canadian Electrical…