Projection thermique — Méthode de classification de la résistance adhésive par indentation
L'ISO 19207 :2016 spécifie la méthode de classification de l'adhérence de revêtements obtenus par projection thermique à température ambiante à l'aide d'une machine d'essai de dureté Vickers. L'ISO 19207 :2016 classe l'adhérence, appelée indice d'adhérence, évaluée à partir de la force d'indentation maximale sans fissuration visible, et elle peut être…
Radiological protection — Medical electron accelerators — Requirements and recommendations for shiel...
ISO 16645:2016 is applicable to medical electron linear accelerators i.e. linear accelerators with nominal energies of the beam ranging from 4 MV to 30 MV, including particular installations such as robotic arm, helical intensity modulated radiotherapy devices and dedicated devices for intra operative radiotherapy (IORT) with electrons.
The cyclotrons and the synchrotrons used for hadrontherapy…
Thermal spraying — Classification method of adhesive strength by indentation
ISO 19207:2016 specifies the classification method of adhesive strength for thermal spray coatings at room temperature by using Vickers hardness testing machine. It classifies the adhesive strength, called adhesion index, evaluated from the maximum indentation force without visible cracking, and it is applicable for relative dense metal coatings, ceramic coatings and cermet coatings. It can be…
Industrial furnaces and associated processing equipment — Safety — Part 3: Generation and use of pro...
ISO 13577-3:2016 specifies safety requirements for generation and use of protective and reactive atmosphere gases that are part of industrial thermo-processing equipment (TPE).
NOTE The general safety requirements common to TPE are provided in ISO 13577‑1 (see Introduction).
ISO 13577-3:2016 deals with significant hazards, hazardous situations and events relevant to the generation and…
Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditi...
ISO 12167-1:2016 applies to hydrostatic plain journal bearings under steady-state conditions.
In ISO 12167-1:2016, only bearings with oil drainage grooves between the recesses are taken into account. As compared to bearings without oil drainage grooves, this type needs higher power with the same stiffness behaviour.
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess
ISO 8051:2016 specifies the dimensions for full-diameter shank taps with recess with nominal diameters from M3 to M10 and thus complements ISO 2283, which concerns relieved shank taps.
It applies to long shank machine taps.
Technical specifications for taps covered by ISO 8051:2016 (including marking) are given in ISO 8830.
Tarauds à machine, à queue longue, de diamètre nominal M3 à M10 — Tarauds à queue pleine, à gorge
L'ISO 8051 :2016 spécifie les dimensions des tarauds à queue pleine, à gorge, de diamètre nominal M3 à M10 et complète ainsi l'ISO 2283 qui concerne les tarauds à queue dégagée.
Elle est applicable aux tarauds à machine à queue longue.
Les spécifications techniques des tarauds faisant l'objet de l'ISO 8051 :2016 (comprenant le marquage) sont données dans l'ISO 8830.
ISO 4302:2016 specifies the assessment of wind loads on cranes.
It establishes general methods for calculating wind loads (for in-service and out-of-service conditions), which are included in the load combinations stated in ISO 8686-1 and used for proofs of competence such as those given in ISO 20332 for the structural components of cranes.
It provides a simplified method of calculation and…
